1PCS 1 Way PWM Relay Switch 3.3V-5V/5V-12V 20A Electronic Controller Module DIY Model Universal Relay Switch for Model Airplane
Features:
Only 5V voltage receivers are supported, otherwise it may cause module damage. If the receiver and steering gear use a high-voltage system, a step-down module should be added to the module.
With boot protection function, easy to operate brands of remote control equipment.
The input channel requires no calibration and is compatible with all.
1 servo signal input, control one electronic switch.
One LED indicates the working status.
Usually start to support 20A current.
Small size and light weight.
Specifications:
Voltage:
Green board: 3.3V-5.2V
Blackboard: 5V-12V
Step 1 Connect
Plug the signal input cable into a free receiver channel that corresponds to a switch on the remote control.
When connected to the receiver, the power indicator lights up.
The working indicator lights up when the switch channel is open, and turns off when the switch channel is closed.
2. Working mode
The red LED light indicates the power indicator.
The blue LED light indicates the working status of the relay.
Step 3 Trigger
Turn the switch (0FF-> ON) on the remote control. The green LED lights up and the relay starts working.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-3cm differences due to manual measurement.
Package includes:
1x Relay Switch