Store Categories
Product Description
Built and tested to strict quality control standards
*Warranty: 3 Years
-Type : 4-wire
-Condition : New
-Length: 400mm&500mm
-Product fit : Direct Fit
-Interchange Part Number：SG1813, 234-4001 234-4610
-Return:30 Days Return And Exchange Guarantee!
Package Include:
4Pcs x Oxygen Sensor
Fit Vehicles:Ford
Ranger
2.3L L4 2004 2005 2006 2007 2008 2009 2010 2011
3.0L V6 2004 2005 2006 2007 2008
Explorer
4.0L V6 2004 2005 2006 2007 2008 2009 2010
4.6L V8 2004 2005 2006 2007 2008 2009 2010
Explorer Sport Trac
4.0L V6 2007 2008 2009 2010
4.6L V8 2007 2008 2009 2010
E-150 4.2L V6 2002 2003
E-250 4.2L V6 2002 2003
F-150
4.2L V6 2002 2003
5.4L V8 2001 2002 2003
5.4L V8 Supercharged 2000 2001 2002 2003
Expedition 5.4L V8 2001 2002 2005 2006 2007 2008
F-150 Heritage
5.4L V8 2004
5.4L V8 Supercharged 2004
E-350 6.8L V10 2009 2010 2011 2012
Mazda
B2300 2.3L L4 2004 2005 2006 2007 2008 2009 2010
B3000 3.0L V6 2004 2005 2006 2007 2008
Lincoln
Navigator
5.4L V8 2001 2002 2006 2007 2008
5.4L V8 DOHC 2005
5.4L V8 SOHC 2005
Mercury
Mountaineer
4.0L V6 2004 2005 2006 2007 2008 2009 2010
4.6L V8 2004 2005 2006 2007 2008 2009 2010
Please see compatibility chart.
Upstream location is between the catalytic converter and the engine
Downstream location is between the catalytic converter and the tailpipe
Please check fitment notes, pictures and interchange part number for accurate information, and pay more attention to confirm the connector of this item is whether matched with your car before purchase. Have a happy shopping.
Must Know Before Buying:
If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedback.
Install Note:
You may be required to reset the vehicle computer after installation of this part.
How do I know the O2 sensor is good or not?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
Thanks for purchasing ^-^
-
We accept Paypal only for the payment, and all orders should be paid through Ebay auction, please do not pay directly to our Paypal account.
-
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.
-
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
We would send out within 2 business days usually . If there is any delay, you will be notified immediately via e- mail .
l Items will be shipped to buyer's eBay registered address. Please confirm your address before making payment.
l We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc
Out 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition , it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.
Notice:
1.All returns must be pre-approved by Autopartm and have a return merchandise authorization (RMA) number.Unauthorized returns will not be accepted.
2.Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in “new” condition. Used items will not be accepted for return.
3.We will replace the returning item with an identical item, issue a full store credit or a full refund.
There is a difference between Genuine and OEM / OE Supplier brands. A genuine part is a part in the auto manufacturer’s original box with their logo on the box. OEM / OE Supplier is a brand licensed by the vehicle manufacturer and the part will not come with the vehicle manufacturer’s logo on it. OEM / OE Supplier parts are often the same parts you’d get at the dealership, just in a different box. We do not accept returns based solely on where a part is manufactured.