1. Atmosphere Light
2. Driving Distance
3. Compass: N(North) S (South) W (West) E (East) (The product can only be used normally after the satellite is found)
4. Setting Button/Scroll Button
5. Over-speed Alarm Icon Fatigue Driving Icon
6. Multifunctional Display Area: Number of satellites, travel angle, 100km acceleration
7. Decorative Atmosphere Light
8. Driving Time
9. Speed Display Area: MPH (miles) Km/H (kilometers)
10. Rotating Bracket
11. Multifunctional Display Area: Time /Altitude
Functions of the Scroll button:
1. Press inward (once): A. Switch display mode
B. Switch settings items in the settings menu
2. Press inward (hold for 2 seconds):
A. Enter the settings menu
B. After the parameter value is adjusted, long press to save and exit
3. Scroll left:
A. Switch the number of satellites, driving speed, 100 km acceleration
B. Adjust parameter values in settings
4. Scroll left (hold for 2 seconds): Turn off/on the buzzer
5. Scroll right: A. Function Switches: Clock/Altitude/Date
B. Adjust parameter values in settings
Setting mode
Press inward the scroll button and hold it for 2 seconds to enter the setting menu, and press inward the scroll button for a short time to select the setting item; After entering the settings item, scroll the button left or right to adjust the parameter values. Press inward the scroll button and hold it for 2 seconds to save and exit.
. No display on the screen, no power
Please check whether the USB cable is damaged, or replace the USB cable for testing.
(Attention: It is forbidden to use a voltage higher than 5V)
2. No speed display
After powering on, the satellite icon flashes to indicate that it is in the state of satellite search, please pull over in an open area without turning off the car to receive the signal, and the machine can be used normally after the satellite icon stops flashing and displays the number of satellites.
3. The speed is still displayed after the car stops
If driving to underground parking lots, tunnels, under flyovers, or other places that make the signal unstable, the data displayed by the product may have a certain deviation, and the car can return to normal by driving to an open road.
4. The speed is not accurate
a. Check whether the unit is correct, Km/H or MPH (Please refer to the setting mode in the figure above for speed unit switching.)
b. The vehicle speed can be fine-tuned, such as the dashboard displays 100Km/H, the machine displays 105Km/H, and the parameter value can be adjusted to 102.
5. Time calibration
a. The default of the machine is +8:00 Beijing time.
b. If you need to adjust the time to other time zones, please enter item 8 of the setting menu, dial left or right to adjust, and the adjustment range is 30 minutes/time (for example: a certain area is 1 hour faster than Beijing time, dial left the wave button twice.)
Note: The satellite icon flashes to indicate that the satellite has not been received, the time is displayed as the time zone, please adjust to the time zone of your country (e.g. South Korea +9:00). After the satellite icon stops flashing, the time calibration can be displayed directly.
6. The driving direction is displayed incorrectly
When there is no speed, the satellite cannot identify the direction of the vehicle, and the normal display can only be displayed after the driving speed exceeds 5Km/h.