Kibri 16060 - H0 gravel distribution and profiling machineUSP2000SWS PLASSER & THEURER
Kit. Prototype data: LüP 19 m, pivot distance 11.5 m, total mass 55 t, engine power approx. 400 kW, max. Driving speed 100 km/h. Machine with 2 2-axle bogies for tracks and switches with ballast silo, equipped with a split center plow. Suitable for plowing on tracks with line conductors, whereby the flow of ballast can be precisely dosed using a symbol button. The side plow brings the gravel from the area of the bed flank to the top of the bed. Sweeping device with reversible cross conveyor belt for depositing excess gravel on the side of the bed. Steep conveyor belt, gravel silo with floor conveyor belt and distribution devices are used to store and reintroduce gravel material. Hydrostatic drive on Allen axles, UIC brakes, large cabin with driver's cabs and windscreens made of safety glass. The correctly defined bed cross-section is particularly important for securing the track position against warping. The correct distribution of the ballast in the track as well as the recovery from the side is a factor of maximum cost-effectiveness. Processing the bedding surface, especially on the flanks, also has a beneficial effect against plant growth in the bedding area. This is primarily a purely mechanical influence on the gravel surface. On high-speed routes, it is important to work on the sleeper surfaces and the intermediate compartments by thoroughly sweeping them in order to prevent gravel stones from being thrown up due to the high speeds. With NEM slot. Dimensions: LüP 21.8 x W 4.2 – 6.5 x H 5.2 cm. Difficulty level: 3 (professionals).