Item is new with open box. Not tested.

Burkert Solenoid Valve

The Burkert 6013 series 1/4in G female solenoid valve has a supply voltage rating of 230VAC. This 2-port NC position valve is a vibration-proof, bolted coil system and has high-quality seal material FKM as standard. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak tightness. The maximum opening and closing time of the valve is 20 milliseconds and 30 milliseconds. It is suitable with compressed air, natural gas, water and hydraulic oil.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 10bar

Brass body with a polyamide coil

Coil can be changed easily with valve in place

Coil can be locked in four by 90° positions or move free in between, as required

Direct-acting and compact valve up to diameter of DN 6.0

Flow factor (Kv) is 0.23m³/h

Medium is only in contact with the valve internals and the body

Operating temperature ranges between -10°C and 55°C

Power consumption is 8W

Applications

Pneumatic control

Shut-off, dosing, filling and venting

Small-scale instruments, laboratory and measuring technology

Welding technology

Certifications

IP65 rated

Specifications

Attribute

Value

Supply Voltage 230 V ac

Number of Ports 2

Connection Size 1/4in

Connection 1/4 in G Female

Operation Direct

Default Valve Position NC

Suitable Applications Liquid, Neutral Gas

Type 2/2

Orifice Diameter 3mm

Body Material Brass

Series 6013

Maximum Working Pressure 10 bar

Operating Temperature Range -10 → +55 °C

Minimum Operating Temperature -10°C

Thread Standard or Connection Type G

Maximum Operating Temperature +55°C

Connection Gender Female

Maximum Closing Time 30ms

Flow Factor Kv 0.23m³/h

Maximum Opening Time 20ms