TECHNNICAL SPECIFICATIONS
Accuracy: ±a% of reading: ± N0 digits.
Environmental temperature : 23℃±2℃.
Relative Humidity: <75%.
1. DC Voltage: 200mV-600V ±(0.5%±2dgts)
2. AC Voltage: 200/600V ±(1.2%±10dgts)
3. DC Current: 2mA-10A ±(1.0%+2dgts)
4. Resistance: 200Ω-2MΩ ±(0.8%±3dgts)
5. Power supply: 9V battery,NEDA 1604 6F22 type. (battery not included)
6. Max. display: 1999
7. Diode: Yes
8: Dynatron: Yes
9. LCD: Yes
10: Continuity Buzzer: Yes (resistance lower than 30Ω±20Ω)
11: Input Impedance for DCV: 1MΩ
12: Sample Rate: 3times/S
13: Low Battery Indication: Yes
14: Data Hold: Yes
Notes:
1.Pls do not change the inner circuit to aviod damaging the ammeter1
2.Do not connect it to the voltage over 1000VDC or 750VAC
3.Make sure not connect the error measure range
4.Pls do not use the ammeter if the back cover is wrong
5.Pls remove the pen and cut off the power before replacing battery and fuze
6.Do not directly plug into the socket to measure the current; otherwise, the meter will be damaged
7.Please read the instructions for specific measurement methods
1 x Digital LCD Multimeter Voltmeter Ohmmeter Ammeter (Battery Not Included)
2 x Test Leads
1 x English Manual
1 x Packing Box