Small in stature. Big on capability
|
|
|
---|---|---|
Only for SATA(NGFF) SSDsTwo slots for different drive lengths:2230, 2242, 2260, 2280. It only support M.2 (NGFF) SATA SSD. |
5V External Power SupplyThe M.2 SATA RAID enclosure can be powered directly from the USB port on your device. So the external power is optional. You can use it or not. |
Unique Snowflake Shaped FinsIncreasing nearly 45% of the heat dissipation area, plus a silicone pad inside for better heat dissipation performance. |
Note: The new SSD needs to be initialized and formatted before use
1. Toggle the dip switch to the RAID mode you need.
2. Hold the "SET" button and then connect the power cable / data cable to power it on. The indicator lights will flash quickly and then it will go out. When the indicator light flash and go out for the second time, the RAID setting is finished. Release the "SET" button and find your SSDs in "disk management".
3. After finishing the RAID setting, the new drive will show up in your disk management.
4. To change the RAID mode, please safely eject from the computer first, then repeat step 1 and 2 to finish your RAID setting.