features

• Name: 12V ship type adjustable high and low temperature electric heating handle

• Net weight: 71g

• Material: PET metal heating film

• Product size: 9.5CMX8cm

• Input voltage: 12V

• Product power: 10W (power on one side), 20W on both sides

• Handle temperature: low temperature: 30 ℃; High temperature 50 ℃ - 60 ℃

• Switch type: three position adjustable switch

• Product accessories: a pair of left and right handlebars and a pair of heat shrinkable sleeves; One waterproof insulating tape; One manual

• Applicable models: 12V all motorcycle models

Product advantages:

• 【1】 Simple refitting method is adopted, which is not only nondestructive, but also easy to operate and install

• 【2】 PET metal heating film is used, which is very fast, safe and fast

• 【3】 The three gear adjustable switch can be used to adjust the high and low temperature at will according to your own needs. The design is very user-friendly

• 【4】 The switch design can be directly installed on the rear-view mirror base without punching or damaging. It is very simple

• 【5】 DC 12V input, suitable for all motorcycles, with a very wide range of applications

Installation method:

• 【1】 : Put the electric heater on the handlebar and adjust it to the proper position

• 【2】 : Fix (wrap) the electric heater onto the handlebar evenly with adhesive tape, especially at the junction of the electric heater

• 【3】 : Put on the sleeve, adjust the position, and blow the two folds of the outer sleeve with a hot-air gun (or a lighter or a hair dryer) in a longitudinal symmetry until the contraction is uniform, and then blow the other parts evenly until all parts of the outer sleeve shrink evenly and smoothly

• 【4】 : The switch is installed under the mirror rod of the rearview mirror

• 【5】 : Connect the power cord. The red wire and black wire do not have positive and negative poles, but must be connected to the switch lock (where the key is inserted)