Model	Hard Cover Case Maker Portable Hardback Hardbound Making Machine
Voltage	110V
Max Cover size	600x520mm(23.6''x20.4'')
The thickness of board	0.5~6mm
Refraction And reflection mechanism	Yes
The function of negative pressure Absorption	Yes
Corner cutter	Yes
Edge folder	Yes
Temperature Range	0-250 degree Celsius
Dimension W×D×H	700x570x230mm
Net Weight	42kg
Packing Weight	60kg
Packge	Wooden Case

The machine takes use of the principle of reflection and refraction of light to position the cover at the central area, so one can see the position of the book spine clearly. The positioning speed and precision is greatly improved.There is also assistant sucking device under pressure to make the cover flat and not move, so there will be no air bubbles. The cover, cardboard and central spine board can be adjusted and positioned accurately. The adaptble thickness of cardboard is 0.5-6 mm

Printing and binding professionals know that the secret to satisfied, repeat customers is the quality of the finished product. Customers are demanding more personalization to set their company collateral apart from the competition. Company image is everything.

Imagine, being able to created a fully decorated hard cover on-demand in minutes! You are only limited by your imagination. Print photos, logos, artwork or text. Let your customers be in control of their image versus being limited by technology.

Steps to creating a custom hard cover (case book):

Step 1: Insert your chipboard or card stock in the rotating arm of the DW-100H and turn on the table light.

Step 2: Print your image on super-size tacking sheet (inkjet printable back Adhesive plastic sheet) which can be bought from local Sign supplies store). You can optionally laminate the sheet using an 8 micron laminate for protection. Peel off the pressure sensitive backing and lay the sheet face down on the DW-100H table.

Step 3: Rotate the DW-100H arm, which lowers the card stock onto the tacking sheet in the precise position. Trim the corners at 45 degrees and fold over the four edges.

Step 4: Run the cover through the laminator to cold pressure press out any paper bubbles or wrinkles. Your hard cover is now ready for binding!

Step 5: Place a hard cover fly-sheet on each side of your book block. Bind the book on a binding machine and then peel out the backing from the fly sheets. The inside chipboard is now covered. If you wish, you can pre-print on the inside of the cover fly-sheets to give your book that extra professional touch.

Deatils Show:

Wireless A4 Book Binding Machine Hot Melt Glue Book Paper Binder Puncher 

Product details:

Model: DC-30+

Type: desktop perfect binding machine.

Brand: DOCON

Milling cutter：yes

Max binding size: 320x 280mm (12.6''x 11'')

Max binding thickness: two pages-40mm

Max cover thickness:50-400g

Heating time: 15min (depends on ambient temperature)

Power: 500W

Dimension: 650x350x500mm

Machine net weight: 36kg

Preheating time: 10 mins

Digital temperature control: Yes