THE MOST EXPENSIVE TURNTABLE YOU COULD JUSTIFY - CHECK
THE UPGRADED CARTRIDGE THAT SITS DEEPER IN THE GROOVES - CHECK
THE CUSTOM TONEARM THAT DEFINITELY MADE A DIFFERENCE - CHECK
THE PREMIUM PHONO STAGE, BECAUSE WHY NOT? - CHECK
THE TRIP TO IKEA, AND THE INEVITABLE UPGRADE TO A BIGGER KALLAX - CHECK
A JANKY DIY BACKSTOP MADE OF POOL NOODLE OR MDF TO STRAIGHTEN THE RECORDS...
WAIT, WHAT?
Like Gary Pallister in his prime, or Gandalf at Helm’s Deep, with pre-installed adhesive and screw holes for an additional mechanical fix, nothing is getting past the Groove Grids Bumpers.
Designed to fit perfectly with the popular IKEA KALLAX shelving system, but with a clever little adapter that can expand them out to wider storage solutions, this product brings uniformity, performance, and class to a collection display.
The cushioned front face is gentle enough to avoid damage to your precious sleeves, but strong enough to give a uniform finish up front, while the Groove Grids branded rear focuses on providing enough support to take a good shunt.
Not that you would do that. Would you?
Sold in sets for 4, 8, and 12 cube KALLAX systems in black or white. Contact me to discuss options for non-Kallax storage. Bin the pool noodles and bits of MDF glued together. Your collection deserves better.
1. Ensure surfaces to which tape is to be applied
are clean, sound and dry. Non-porous surfaces i.e. ceramic tiles, PVC, and IKEA
KALLAX shelves must be de-greased with white spirit and allowed to dry before
application. Press item to be bonded firmly into place with even pressure. A
secure bond will be formed immediately however full bond strength will be
achieved after 48 hours.
2. Despite the 3kg sheer strength of the tape, different
environmental factors can impact the performance of adhesive. For
that reason, the Groove Grids Bumpers feature a pre-drilled screw hole and
recessed washer. Whilst not mandatory, it is strongly recommended that you
first position and secure the bumpers to your liking using the adhesive before
then using the provided 3.5 x 20mm screws and washers to complete the
installation.
Kit
contents: |
||
Bumper –
Left Sections |
Bumper –
Right Sections |
Mammoth
Adhesive Tape |
Alcohol Wipe (x1) |
Washers |
Screws |