| |||||||||||||||||||||||||||||||||||||||||||
Mains Consumer unit installation kit Not to be confused with slightly cheaper but dangerous and ILLEGAL single pole units ! | |||||||||||||||||||||||||||||||||||||||||||
This listing is for a 16A mains installation kit. Please note: We are generally able to offer this kit with variations such as colour of external inlet and also a surface mount one as shown in the third photo. Please enquire before purchase as there may be a small additional charge and also we will need to ensure we have what you require. The surface unit is NOT included as standard in the kit. APPLICATIONS INCLUDE: Caravans, Self build Camper vans, Motorhomes, Boats, and other vehicles that require hook up via a 3 pin caravan type lead. The kit includes all the parts required for a standard installation*. *NOTE! Due to the range & type of vehicles we have not included the screws for fixing the inlet to the side of the vehicle. SPECIFICATION: The Consumer unit is ready for installation and includes a mains polarity warning lamp. This is an important feature, as reveresed polarity is potentially lethal and quite commonplace particularly on the continent. A label is provided with the consumer unit with regard to the RCCB operation. This unit is specifically designed for use in vehicles. * Consumer unit dimensions H181 x W110 x D96mm approx * The unit will indicate a reversed input polarity via the Red neon indicator. This unit is produced specifically for Caravans and Motorhomes etc. CONTENTS INCLUDE: * Consumer unit: 1 x 25A RCCB 30mA 1 x DP MCB 10A * 5 metres of white 1.5mm sq flexible mains cable for wiring 13A mains sockets etc * 2.5 metres of blue 2.5mm sq flexible mains cable for wiring from inlet to consumer unit. * 2 metres of yellow/green earth wire for connecting incoming earth to chassis for safety. * Beige square flush fitting 16A mains inlet (male) Requires a standard male to female hookup lead to connect to site mains. * Twin flush fitting 13A C-Line CBE type sockets with faceplate & saftey rear covers. * Bag of cable ties sticky bases and screws (for consumer unit and flush inlet) * Instruction leaflet supplied PLEASE NOTE THE LAST TWO PHOTO'S SHOW THE ALTERNATIVE INLETS THAT WE CAN SUPPLY | |||||||||||||||||||||||||||||||||||||||||||
|