Nylon Front Bar With Led Light
Description:
100% brand new
Name: Front Bumper
Material: nylon
Color: black
Suitable for: For Traxxas 1/18 Trx4m K10 RC
Features:
Trx4m Chevrolet k10 conversion special front bumper with lights, nylon material is impact resistant, factory installed lights, you just need to remove the 4 screws fixed by the beam, and then replace the two screws of the original front bumper with matching 2*10 screws. After that, reinstall the 4 screws on both sides of the beam and you are done.
The light connector is plugged directly into the reserved connector on the stock ESC, be careful not to reverse the positive and negative poles.
Fender Lining Decoration
Description:
100% brand new
Name: Fender
Material: plastic
Color: black
Quantity: Pair
Model：For Traxxas 1/18 Trx4m K10 Heightening RC
Features:
Trx4m
chevy k10 heightening crossover version special liner, other versions
can not be used. Trouble to see the version before shooting.
Installation method, remove the 8 screws on both sides of the beam and
replace them with the screws matching this product. The other two 2 * 6
screws and two 2mm nuts for the ESC two holes in front of the reserved
screws, according to their own situation to decide whether you need to
install. Installation of this product after the installation of the car
shell, pay attention to, due to the car shell on the wide and narrow
reasons, the car shell and chassis mounting connection to break open the
car shell on both sides in order to put in place.
Mind do not shoot
thank you for your understanding. Installation of this product can be a
large expansion of the space inside the chassis to facilitate a variety
of late diy fixed electronic equipment. At the same time can reduce the
mud and sand by the wheels thrown into the chassis. Keep the interior
clean. Can also reduce the time to take pictures and shoot video from
the side to look at the opposite side of the easy to see the
embarrassment, increase the sense of reality.
Package List:
1 pair of fenders
Front Rear LED Light + Roof Light
Description:
100% brand new
Name: front and rear lights + dome light
Material: nylon
Color: black
Specification: front and rear lights/front and rear lights + dome light
Model：For Traxxas 1/18 Trx4m K10 Heightening RC
Features:
Front and rear lights:
Reserve
the roof round row light interface. Optimize the line wiring more
simple. Product includes two original headlights, replace with warm
white, yellow fog lights two tail lights red two. Due to the original
lamp cup back cover does not have a fog light installation position, so
you need to replace the lamp set matching lamp cup back cover.
Installation method, the back of the red lights directly into the
factory reserved light holes can be. Front lights need to remove the
factory lamp cup cover four screws two big and two small, lamp cup cover
note that the left and right, and then according to the original left
and right to the lamp set matching lamp cup cover directly mounted. Fog
lamps and headlamps are pre-installed in the lamp cup cover, you just
need to re-install the original screws. The blue arrow in the last
picture points out the connector reserved for the round roof exhaust
lights. Still the arrow points out the socket for the factory ESC to
connect to this light cluster.
Roof Round Lights:
Installation
method, remove the four screws of the silver bracket of the original
fake light, then remove the two screws of the original fake light, and
replace this product directly on it. Note that because the light set
needs to be routed, so the car shell rear bucket needs to be opened. Do
not buy if you mind. As the socket of this round row of lights is
connected to the reserved socket of the front and rear light clusters of
the car shell, you must buy this round row of lights to use the front
and rear light clusters, responsible for the inability to supply power.
Package List:
1*Front and rear lights
OR
1*Front and rear lights + dome light
Rear Bucket Skid Plate
Description:
100% brand new
Name: Metal anti slip rear bucket
Material: Metal
Color: Silver
Size: 80 * 100mm
Suitable for model: For Traxxas 1/18 Trx4m K10 Heightening RC
Features:
1. Detailed simulation, derived from real car design.
2. The anti sliding plate material is stainless steel.
3.
Equipped with screws, fixed with holes will be more secure and not easy
to fall off. double-sided adhesive, needs to be applied by oneself.
4. Customers need to install M1.4 holes themselves
Checklist:
1 * Metal anti slip rear bucket
Windshield Sun Visor
Description:
100% brand new
Name: Sunny Rain Barrier
Material: Acrylic
Color: Transparent black
Suitable model: For Traxxas 1/18 Trx4m K10 Heightening RC
Features:
1. The details of the production should be in place according to the actual car's weather shield reduction.
2. The factory color is transparent black and does not require further coloring.
3. Fix with 3M adhesive.
4.
The original position of the vehicle is fixed without the need for
holes, and it is directly fixed with double-sided adhesive.
Checklist:
1 set
Steel Drive shaft
Description:
100% brand new
Name: drive shaft
Material: steel
Colour:black
Quantity: 1 Pair
Model：For Traxxas 1/18 Trx4m K10 Heightening RC
Features:
Made of high quality steel material, stronger and more durable
Good accessory for modifying RC car, help to improve its performance
Easy to use and easy to replace
Package List:
1 Pair of reinforced steel drive shafts
Anti-skid Snow Chain
Description: Features: Checklist: Window Mesh Protective Net Feature: specification: Package list:
100% brand new
Name: Anti slip chain
Material: stainless steel
Color: Silver
Quantity: 4PCS
Suitable model: For 1/18 Traxxas TRX4M RC
The
1/18 trx4m Land Rover Defender Ford Liema Universal Snow Chain is
designed to increase the vehicle's adhesion on snow or mud, making it
more passable on snow or mud.
The material is stainless steel, which is easy to clean and does not rust.
Regarding
tire matching, please try to install it on the original factory tires
as much as possible. If it is a third-party tire, the tire diameter
should not exceed the original factory diameter by 2mm, and the width
should not exceed the original factory tires, or the diameter should not
exceed the original factory tires by 2mm. Because the tire size is too
tight, it can cause tire compression and deformation.
1 set of anti slip chains (4PCS)
Fine workmanship, perfect style
Improve the authenticity of the RC car
Make your RC car cooler and more attractive
material: metal
Colour: Black
Weight: 60 grams
Size: as shown
Suitable for TRX4M 1/18 D11
TRX4M window grid* 1 set