This product is divided into a new version and an old version. Our product is a new version and can only be used on a NEW version of the car. Please confirm that your original is the new version before purchasing.
Features & Benefits:
1. Stainless-steel calibration slide and spring assembly prevents corrosion within the fuel control body, which leads to an extended service life.
2. Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel.
3. High-temp O-rings enable prolonged sealing of injector under extreme heat conditions.
4. Fiber-optic yttrium aluminum garnet laser welding and 100 million cycle testing ensure quality in every box.
5. Fuel Injector Spray Angle & Pattern and Fuel Volume per millisecond meet OEM specifications.
6. Injector Nozzles designed for optimum fuel automization (mist) for increased performance and fuel economy.
7. Rapid-Pulse Technology ensures proper fuel delivery at all RPM ranges.
8. Robotic Build Technology allows for consistent build quality and specification balance.
Specifications:
Fuel Injector Type: MFI Injector
Fuel Type: Gas
Terminal Gender: Male
Terminal Quantity: 12
Terminal Type: Pin
Fit For:
Fit Chevrolet models:
1996-2005 Chevrolet Astro -V6 4.3L
1996-2005 Chevrolet Blazer -V6 4.3L
1996-1998 Chevrolet C1500 -V6 4.3L
1996-2014 Chevrolet Express 1500 -V6 4.3L
1996-2005 Chevrolet Express 2500 -V6 4.3L
1996-1997 Chevrolet G10-V6 4.3L
1996-1997 Chevrolet G20-V6 4.3L
1996-1998 Chevrolet K1500 -V6 4.3L
1996-1999 Chevrolet P30 -V6 4.3L
1996-2004 Chevrolet S10 -V6 4.3L
1999-2013 Chevrolet Silverado 1500 -V6 4.3L
2007 Chevrolet Silverado 1500 CLASSIC
Fit GMC models:
1996-1998 GMC C1500 -V6 4.3L
1996-2002 GMC Jimmy -V6 4.3L
1996-1998 GMC K1500 -V6 4.3L
1996-1999 GMC P3500 -V6 4.3L
1996-2005 GMC Safari -V6 4.3L
1996-2013 GMC Savana 1500 -V6 4.3L
1996-2006 GMC Savana 2500 -V6 4.3L
1999-2013 GMC Sierra 1500 -V6 4.3L
1996-2004 GMC Sonoma -V6 4.3L
Fit Isuzu models:
1997-2000 Isuzu Hombre -V6 4.3L
Fit Oldsmobile models:
1996-2001 Oldsmobile Bravada -V6 4.3L
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.
OE Number:
OE No.:FJ503,19210688,12568332
Replace Manufacture Part Numbers:FJ503,FJ10565,217-3028,89060439,83322102-6,83322105-6,800-1512N,2-38886,12568332,INJGM01,63885,15856,M1045,2204-510881,16-9706,4G1887,240408,19210688,217-3028,BWD63885
Installation Instructions:
1.Disabling the vehicle’s fuel pump, disconnect the battery.
2.Remove the air box system, throttle body, wiring harness connectors and the PCV valve and hose.
3.Remove Upper Intake Manifold cover and SCPI Fuel Meter Body
4.Remove the Fuel Meter Body bracket and replace it with the updated bracket.
5.Insert the MFI Fuel Meter Body into the Fuel Meter Body Bracket on the Lower Intake Manifold. Push down firmly on the fuel meter body locking it into the bracket.
6.Apply a coat of clean motor oil or non-silicone lubricant to the injector tip for easier installation.
7.Insert the number 3 injector into the correct hole in the Lower Intake Manifold first. Install the number 5 injector next and then number 1.
8.This sequence must be followed correctly to prevent interference of the Fuel Tubes. Injectors 2, 4, and 6 are then installed.
9.Temporarily reinstall the Fuel Inlet and Return Lines into the Fuel Meter Body.
10.Reconnect the battery and vehicle’s fuel pump.
11.Perform a Fuel Pressure System check to verify that the injectors are not leaking.
12.If everything is ok, reinstall the Upper Intake Manifold cover and Fuel lines.
Notice:
1. Please BE AWARE the packing is neutral corrugated paper box packaging.
2. If you are not certain about compatibility of the parts you wish to purchase, send us your VIN. Match the result with the OE number we have in the listing and that would be the Best way to guarantee fitment.
3. For international buyer with right-hand drive vehicle, please pay extra caution while choosing your parts and purchase at your own risk.
4. Please remember to wear protective gear when handling and/or installing any auto part.
5. Please read the item description and check the pictures carefully before buying. Returns are acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost. If there is a quality issue, please provide pictures or video evidence, and we will return it to you after confirming its accuracy.
6. Feedback: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
7. If an injector is old or faulty on a vehicle with high mileage, the remaining injectors are likely in a similar condition. Replace all of your injectors together to ensure each cylinder is receiving the same amount of fuel, for better performance and improved fuel economy.