Features:
*Brand new and high quality
*Made of high quality material, strong and
*Wide range of application: supports any radio station and antenna, no need for professional data lines, suitable for most radio stations and antennas on the market, such as Jianwu, ICOM, Yaesu, Xiegu, USDX, QRP and other radio stations, supports end-feed, vertical, Horizontal, Yagi, inverted V, car and other antennas
*Antenna Tuner + Standing Wave Meter 2 and 1:
*This product is a power and standing wave meter that supports display of standing wave value, forward power and reverse power. Power meter mode supports maximum display of 150W SSB/CW in untuned state.
*Please calibrate the standing wave power value of the device when using or replacing the radio for the first time. Please refer to the manual for details.
*Powerful tuning capabilities:
*Built-in combination of large capacitance and inductance values greatly improves the tuning success rate and reduces the trouble of repeatedly adjusting the antenna . The maximum combined values for capacitors are up to 3869pF and for inductors up to 17.21uH.
*Morse practitioner:
*This product has a 3.5MM headphone on the back panel and supports external single-paddle buttons, allowing you to easily practice Morse in your spare time. No need to buy a separate Morse exerciser, just one device and you can do it all.
*Manual tuning and automatic tuning:
*Supports both manual tuning and automatic tuning modes. In automatic mode, when monitoring radio transmission signals, when the standing wave exceeds the set value (default 1.80), the lowest standing wave is automatically triggered.
In manual mode, you can manually increase or decrease the value through automatic tuning or directly adjust the capacitance or inductance value to a very low standing wave ratio.
*Small and portable: This product is small in size, only about the size of a mobile phone, only 154mmx74mmx29mm (length x width x thickness). It has a compact appearance and is portable outdoors. The metal shell is and , and it weighs only 400g.
*High power resistance: The product uses wide signal lines, imported magnetic powder rings, high-quality copper wires, rated power resistance 100W (SSB), and instantaneous peak power resistance 120W (SSB mode)
*This product can withstand different powers at different frequencies or different modes, please refer to the manual for details
*6 status interfaces, optional: The supports 6 status interfaces, including user storage interface, rod power standing wave meter interface, large font interface, standing wave curve interface, power curve interface, relay and battery voltage status interface
*Built-in professional settings: The supports 13 advanced parameter configurations, suitable for in-depth customization by advanced players, such as automatic storage number, tuning speed, starting power, starting standing wave, power calibration, standing wave calibration, signal test, relay test and other functions. Customize your tuning
*Built-in lithium battery: It uses imported polymer ultra-thin lithium battery with a large capacity of 3300mAh. The unadjusted standby time can reach 150~200 hours, and the adjusted standby time is about 15 hours on average. It is very suitable for outdoor portable and supports Type-C interface charging. Has a fee.
The interface displays the battery voltage and remaining power in real time, so you no longer have to worry about running out of power when using it outdoors.
*The number of relays operating at different tuning levels affects battery life
*Built-in buzzer: Built-in high-power active buzzer, when the button is pressed or the standing wave exceeds the set value, the automatic sound "di-" will sound, promptly reminding the user to pay attention to the current standing wave, and hang the product on the tree with the antenna Feed, the sound is still clear
attention:
*Please read the product instructions and precautions carefully before using the equipment;
*Before using self-tuning, be sure to adjust the radio power to the lowest power to prevent damage to the radio or the tuner;
*When using or changing the radio for the first time, the standing wave power value of the device needs to be recalibrated. When the standing wave power values displayed by the radio station and the equipment are inconsistent, the radio station shall prevail;
*Please use the Type-C charging cable included with this product for charging
*Keys are not included in delivery list
Specification:
*Name: Antenna Tuner
*Large battery capacity: 3300mAh
*Weight only: 400g
*Rated power resistance: 100W (SSB),
*Instantaneous peak power resistance: 120W (SSB mode)
*Dimensions: 154mmx74mmx29mm (length x width x thickness)
*Maximum combination value of capacitors up to: 3869pF,
*Maximum combined value of inductors up to: 17.21uH.
Package Included:
1X host
1XUSB TYPEC data cable
2XL hex wrench
4X pad
1English manual
Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.
