Fluke BT510 key features
Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test
Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery
Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration
Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation
Threshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement
Intercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string. Once the measurements are completed Fluke Battery Management Software version 1.0.69 can now report the strap resistance for a battery string or historical data over time.
AutoHold – When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement starts
AutoSave – When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is captured
Fluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports
Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis
Optimized user interface – Quick, guided setup ensures you're capturing the right data every time
Battery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation.
USB port – For fast data download to supplied data analysis and report management application software.
Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment.
|
Functions |
Range |
Resolution |
Accuracy |
BT510 |
BT520 |
BT521 |
|
Battery Resistance / Strap Resistance1 |
3 mO |
0.001 mO |
1% + 8 |
? |
? |
? |
|
30 mO |
0.01 mO |
0.8% + 6 |
? |
? |
? |
|
300 mO |
0.1 mO |
0.8% + 6 |
? |
? |
? |
|
3000 mO |
1 mO |
0.8% + 6 |
? |
? |
? |
|
VDC |
6 V |
0.001 V |
0.09% + 5 |
? |
? |
? |
|
60 V |
0.01 V |
0.09% + 5 |
? |
? |
? |
|
600 V |
0.1 V |
0.09% + 5 |
? |
? |
? |
|
1000 V |
1 V |
0.09% + 5 |
|
|
? |
|
VAC (45 Hz to 500 Hz with 800 Hz filter) |
600 V |
0.1 V |
2% + 10 |
? |
? |
? |
|
Frequency (displayed with VAC and AAC)2 |
500 Hz |
0.1 Hz |
0.5% + 8 |
? |
? |
? |
|
AC voltage ripple (20 KHz Max) |
600 mV |
0.1 mV |
3% + 20 |
? |
? |
? |
|
6000 mV |
1 mV |
3% + 10 |
? |
? |
? |
|
ADC/AAC (with accessory Fluke i410) |
400 A |
1 A |
3.5% + 2 |
|
|
? |
|
Temperature |
0°C to 60°C |
1°C |
2°C (4°F) |
|
|
? |
|
Meter mode |
999 records for each measurement position with time stamp |
|
Sequence mode |
Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp |
|
1. The measurement is based on AC injection method. The injected source signal is < 100 mA, 1 kHz.
2. Trigger level VAC: 10 mV, AAC: 10 A |
|
Measurement Modes |
BT510 |
BT520 |
BT521 |
|
|
|
|
Resistance (mO) |
? |
? |
? |
|
|
|
|
Battery voltage |
? |
? |
? |
|
|
|
|
Voltage DC |
? |
? |
? |
|
|
|
|
Voltage AC and frequency (Hz) |
? |
? |
? |
|
|
|
|
Ripple volt |
? |
? |
? |
|
|
|
|
Temperature of negative battery post |
|
|
? |
|
|
|
|
DC and AC current (and frequency) |
|
|
? |
|
|
|
|
DMM mode |
? |
? |
? |
|
|
|
|
Sequence mode |
|
? |
? |
|
|
|
|
Discharge measurement mode |
? |
? |
? |
|
|
|
|
Automatic measurement save |
? |
? |
? |
|
|
|
|
Wireless commumcation |
|
|
? |
|
|
|
|
Memory view |
? |
? |
? |
|
|
|
|
General Specifications |
|
Size (H x W x D) |
22 x 10.3 x 5.8 cm (9 x 4 x 2 in) |
|
Weight |
850 g (1.9 lb) |
|
Screen dimensions |
7.7 x 5.6 cm (3 x 2.2 in) |
|
Interface |
USB mini |
|
Warranty |
3 years |
|
Environment Specifications |
|
Operating temperature |
0°C to 40°C |
|
Storage temperature |
-20°C to 50°C |
|
Lithium-ion battery charging temperature |
0°C to 40°C |
|
Operating humidity |
Non-condensing (10°C) |
|
= 80% RH (at 10°C to 30°C) |
|
= 75% RH (at 30°C to 40°C) |
|
Operating altitude |
Sea level to 2000 meters |
|
Storage altitude |
Sea level to 12,000 meters |
|
IP rating |
IP40 |
|
Radio |
FCC Class A |
|
Vibration requirements |
MIL-PRF-28800F: Class 2 |
|
Drop test requirements |
1 meter |
|
Temperature coefficients |
Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
|
Safety compliance |
600 V CAT III |
|
EMC |
IEC 61326 |
|
ROHS |
China, Europe |
|
Protection class 2 |
Pollution Degree II |
|
Battery compliance |
UN38.3 |
|
UL2054 |
|
IEC62133 |
|
2 G per IEC68-2-26, 25 G, and 29 |
Includes:
Battery analyzer
4-wire test pin (set)
BTL10 Basic Test Lead (set)
TL175 TwistGuard™ Test Leads with adapter
BP500 lithium-ion battery
BC500 AC charger
mini-USB cable
Shoulder strap
Belt strap
Magnetic hanging strap
FlukeView® Battery Management Software
Soft carrying case
Spare fuses (2)
Zero Ohm Calibration Resistor