HyPro-8+
The HyPro-Line of joystick radio remote controls convinces with its ergonomic shape
and compact design. Originally developed for mobile hydraulics, the concept is now
also being used in other areas. Its robust housing offers space for 8 single-axis joysticks,
which can be optionally 1-, 2-, 3-, 4- or 5-stage. You have the option of using both a
monochrome display and a TFT display for data feedback.
The latest development in the HyPro series expands its previous models with a 3.2 inch LC color display. This makes it possible to display any data feedback in high resolution.
- Exceptional, compact and ergonomic design
- Integrated LC display
- SMJ technology
- Protection class IP67
The HyPro-Line of joystick radio remote controls convinces with its ergonomic shape
and compact design. Originally developed for mobile hydraulics, the concept is now
also being used in other areas. Its robust housing offers space for 8 single-axis joysticks,
which can be optionally 1-, 2-, 3-, 4- or 5-stage. You have the option of using both a
monochrome display and a TFT display for data feedback.
The latest development in the HyPro series expands its previous models with a 3.2 inch LC color display. This makes it possible to display any data feedback in high resolution.
- Exceptional, compact and ergonomic design
- Integrated LC display
- SMJ technology
- Protection class IP67
Description
In order to adapt the HyPro, which is popular for hydraulic applications, to even more areas of application, an LC color display was integrated. The exceptional ergonomic design has been retained because the compact transmitter has proven itself in use. The compact housing offers space for 6 or 8 single-axis joysticks with up to 5-stage detents. In addition, 12 pushbuttons are integrated into the HyPro+ to cover as many functions as possible. Alternatively, 6 toggle switches and 6 pushbuttons can also be installed. The possibilities are varied.
Even the most adverse conditions cannot harm the HyPro+: thanks to the specially developed housing, it has protection class IP67 and is therefore particularly well protected against ingress of dust, dirt and water. Optional protectors attached to the sides can also be used to cushion strong impacts and provide additional protection for the radio remote control.
Thanks to our patented SMJ technology, you can easily replace a defective joystick yourself in just a few simple steps. The housing remains closed at all times so that neither dust nor dirt can get inside the transmitter. Changing the joystick is possible at any time and anywhere and your system will be fully operational again in just a few minutes!
| Frequency range | 419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz (depending on customer requirements and country-specific regulations) |
| RF performance | ≤ 1 mW, ≤ 10 mW, ≤ 25 mW (depending on the frequency range and country-specific regulations) |
| Typical work area | ≤ 100 m (depending on environmental conditions) |
| Frequency channel search, automatic | LBT mode (Listen Before Talk) (depending on country and function configuration) |
| antenna | Integrated |
| Typical response time of control commands | approx. 50 ms |
| Modulation method | FSK / GFSK |
| Data rate (depending on customer requirements) | 9,600 baud (bits/sec.) at SubGHz 250k at 2.4 GHz |
| SMJ technology | Joysticks can be replaced by the operator themselves in the event of service |
| Ø Current consumption (depending on the expansion level) | approx. 100 mA |
| Early warning time “battery empty” | about 15 minutes |
| Data feedback (only with LC display) | Range, transmit signal strength, machine function status or customer-specific information |
| Acoustic feedback | Integrated buzzer, setting according to customer requirements |
| Energy saving function | (standby)Standard: after 60 minutes. Optional: Setting according to customer requirements (continuous operation possible) |