Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube. With the Nextion Editor software (Official Download), users are able to create and design their own interfaces for Nextion display.
Package includes: Nextion Display, connecting wire, a power supply test board.
Go Shopping: NX4832T035 (IM150918001)
Note: the small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.
Nextion Type | Basic Series |
Nextion Models | NX4832T035_011N (N: No touch) |
NX4832T035_011R (R: Resistive touchscreen) |
Data | Description | |
Color | 64K 65536 colors | 16 bit 565, 5R-6G-5B |
Layout size | 100.5 (L)×54.94 (W)×4.25 (H) | NX4832T035_011N |
100.5 (L)×54.94 (W)×5.45 (H) | NX4832T035_011R | |
Active Area (A.A.) | 85.50mm(L)×54.94mm(W) | |
Visual Area (V.A.) | 73.44mm(L)×48.96mm(W) | |
Resolution | 480×320 pixel | Also can be set as 320×480 |
Touch type | Resistive | |
Touches | > 1 million | |
Backlight | LED | |
Backlight lifetime (Average) | >30,000 Hours | |
Brightness | 200nit (NX4832T035_011N) | 0% to 100%, the interval of adjustment is 1% |
180 nit (NX4832T035_011R) | 0% to 100%, the interval of adjustment is 1% | |
Weight | 38.2g (NX4832T035_011N) | |
48.2g (NX4832T035_011R) |
Test Conditions | Min | Typical | Max | Unit | |
Operating Voltage | 4.75 | 5 | 7 | V | |
Operating Current | VCC=+5V, Brightness is 100% | – | 145 | – | mA |
SLEEP Mode | – | 15 | – | mA | |
Power supply recommend:5V, 500mA, DC |
Test Conditions | Min | Typical | Max | Unit | |
Working Temperature | 5V, Humidity 60% | -20 | 25 | 70 | °C |
Storage Temperature | -30 | 25 | 85 | °C | |
Working Humidity | 25°C | 10% | 60% | 90% | RH |
Test Conditions | Min | Typical | Max | Unit | |
Serial Port Baudrate | Standard | 2400 | 9600 | 115200 | bps |
Output High Voltage | IOH=-1mA | 3.0 | 3.2 | V | |
Output Low Voltage | IOL=1mA | 0.1 | 0.2 | V | |
Input High Voltage | 2.0 | 3.3 | 5.0 | V | |
Input Low Voltage | -0.7 | 0.0 | 1.3 | V | |
Serial Port Mode | TTL | ||||
Serial Port | 4Pin_2.54mm | ||||
USB interface | NO | ||||
SD card socket | Yes (FAT32 format), support maximum 32G Micro SD Card * microSD card socket is exclusively used to upgrade Nextion firmware /HMI design |
Memory Type | Test Conditions | Min | Typical | Max | Unit |
FLASH Memory | Store fonts and images | 16 | MB | ||
RAM Memory | Store variables | 3584 | BYTE |
The Nextion Basic Series offers 2.4”, 2.8“ 3.2”, 3.5”, 4.3”, 5.0”, 7.0” HMI display size options for you.
You can develop the HMI GUI project via the free Nextion Editor software, the easy Drag-and-Drop components and simple ASCII text based instructions will dramatically reduce your HMI project development workloads.
The Nextion solution is the best balance HMI solution between cost and benefit with low and decreased learning curve.
– Versatile screen sizes from 2.4” to 7.0”
– TFT RGB 65K resistive touchscreen
– Onboard processor and memory
– XH2.54 4P (+5V, TX, RX, GND) TTL serial interface
– 4/16 MB memory for HMI project
– 1% interval adjustable brightness
– CE and RoHS Compliant
Nextion is a Human Machine Interface (HMI) solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development. Using the NEXTION Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider etc.) and ASCII text based instructions for coding how components interact at display side. Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX ,GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress and status back to Nextion display utilizing simple ASCII text based instructions.
The Intelligent Series products have more powerful hardware in terms of MCU, Flash storage and SRAM compared with Basic Series and Enhanced Series. What’s more and new? The audio, video and animation play functions enriches user’s project HMI interaction. The Intelligent Series supports advanced software features and functions such as transparent component, page loading effect, component Move and Drag .etc.
Package includes: Nextion NX 8048P070-011C HMI Display*1, XH2.54 4P wire*1, power supply test board*1.
Go Shopping: NX8048P070-011C (IM190402004)
Note: the small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.
Nextion Type | Intelligent Series |
Nextion Models | NX8048P070-011C (7.0 inch capacitive touchscreen without enclosure) |
Data | Description | |
Color | 65K 65536 colors | 16 bit 565, 5R-6G-5B |
Layout size | 181mm(L)×108mm(W)×9.3mm(H) | NX8048P070-011C |
Active Area (A.A.) | 164.90mm(L)×100.00mm(W) | |
Visual Area (V.A.) | 154.08mm(L)×85.92mm(W) | |
Resolution | 800×480 pixel | Also can be set as 480×800 |
Touch type | Capacitive | |
Touches | > 1 million | |
Backlight | LED | |
Backlight lifetime (Average) | >30,000 Hours | |
Brightness | 300nit | 0% to 100%, the interval of adjustment is 1% |
Weight | 310g |
Test Conditions | Min | Typical | Max | Unit | |
Operating Voltage | 4.75 | 5 | 6.5 | V | |
Operating Current | VCC=+5V, Brightness is 100% | – | 430 | – | mA |
SLEEP Mode | – | 170 | – | mA | |
Power supply recommend:5V, 1.0A, DC |
Test Conditions | Min | Typical | Max | Unit | |
Working Temperature | 5V, Humidity 60% | -20 | 25 | 70 | °C |
Storage Temperature | -30 | 25 | 85 | °C | |
Working Humidity | 25°C | 10% | 60% | 90% | RH |
Test Conditions | Min | Typical | Max | Unit | |
Serial Port Baudrate | Standard | 2400 | 9600 | 921600 | bps |
Output High Voltage (TXD) | IOH=1mA | 3.0 | 5.0 | Vin | V |
Output Low Voltage(TXD) | IOL=-1mA | 0.1 | 0.2 | V | |
Input High Voltage(RXD) | 3.0 | 5.0 | Vin | V | |
Input Low Voltage(RXD) | -0.7 | 0.0 | 1.3 | V | |
Serial Port Mode | 3.3V/5.0V TTL | ||||
Serial Port | 4Pin_2.54mm | ||||
USB interface | NO | ||||
SD card socket | Yes (FAT32 format), support maximum 32G Micro SD Card * presence of *.tft file on microSD: socket is exclusive to upgrade Nextion firmware/HMI design * Intelligent Series only: see Instruction Set / Editor Guide for microSD card runtime usage | ||||
Extended IO | 8 Digital extended GPIO | ||||
IO0-IO7 support input, output and component binding event * IO pin / ports are not exclusive, limit current draw to 1mA recommended | |||||
IO6-IO7 support PWM | |||||
RTC | built-in RTC support (Battery type: CR1220) |
Vin: the input voltage of power supply
Memory Type | Test Conditions | Min | Typical | Max | Unit |
FLASH Memory | Store fonts and images | 120 | MB | ||
User Storage | EEPROM | 1024 | BYTE | ||
RAM Memory | Store variables | 512 | KB | ||
Instruction Buffer | Instruction Buffer | 4096 | BYTE |
Speaker | Parameter | Min | Typical | Max | Unit |
Power | – | 0.5 | – | 1.5 | W |
Audio Connector Type:1.25T-2-2A (1.25mm pitch 2-pin housing) |
4.3″, 5.0″, 7.0″ and 10.1″ display size in Nextion Intelligent Series are now available.
The Intelligent Series products have more powerful hardware in terms of MCU, Flash storage and SRAM compared with Basic Series and Enhanced Series. What’s more and new? The audio, video and animation play functions enrich user’s project HMI interaction. The Intelligent Series supports advanced software features and functions such as transparent component, page loading effect, component Move and Drag .etc. Check it out from below table!
For Intelligent Series, users can develop the HMI GUI project via the free latest Nextion Editor software version 0.58 or above, the easy Drag-and-Drop components and simple ASCII text based instructions will dramatically reduce your HMI project development workloads.
The Intelligent Series is an advanced and powerful HMI solution for you.
– Available Display Size in 4.3″, 5.0″, 7.0″ and 10.1″
– RGB 65K Resistive/Capacitive touchscreen
– Onboard MCU 200MHz and up to 128MB for HMI project
– Onboard RTC,EEPROM, 8 digital GPIOs (2 PWM capable) and audio interface
– XH2.54 4P (+5V, TX, RX, GND) TTL serial interface
– 1% interval adjustable brightness
– CE and RoHS Compliant
HARDWARE FEATURE | INTELLIGENT SERIES | ENHANCED SERIES | BASIC SERIES |
---|---|---|---|
Screen Size | 4.3″ – 10.1″ | 2.4″ – 7.0″ | 2.4″ – 7.0″ |
Resistive Touch | √ | √ | √ |
Capacitive Touch | √ | √ (Only 7″ with enclosure) | × |
MCU | 200 MHz | 108/48 MHz | 48 MHz |
Flash | 128 MB | 32/16 MB | 16/4 MB |
SRAM | 512 KB | 8192/3584 Byte | 3584 Byte |
EEPROM | 1024 Byte | 1024 Byte | × |
GPIOs | 8 | 8 | × |
RTC | √ | √ | × |
– Free and Easy-to-Use Nextion HMI software
– ASCII text based instructions for display side coding
– Assignable attribute value components at runtime
– Drag-and-Drop components for GUI design and interaction
– Built-in debugger for HMI project simulation
– User Event Code pane for GUI interaction and peripheral MCU communication
The Nextion IO Adapter is made specially to work with Nextion Enhanced HMI Display Series which covers standard 2.4″, 2.8″, 3.2″, 3.5″, 4.3″, 5.0″, 7.0″ The small board allows Nextion Enhanced display users to have extended IO to connect with external devices