Package includes:
1 Roll silicone rubber sealing sticker 

Type 1：
 16ft Self Adhesive Weather Stripping Door Seal Strip Silicone Bottom Stopper



Weather Stripping Door Seal:Windproof, dust-proof, weatherproof, energy-saving, soundproof, and anti mosquito
Rubber Flex Seal:Widely used for frameless sliding doors、glass doors、door bottom、plastic-steel windows and aluminum windows、cupboards、wardrobes、furniture、sliding door、shower room
The Door Bottom Seal Made Of Silicone, Non-toxic: True material, homogeneity of color, the same interior and exterior, heat and cold resistant
Easy to Install：Only need to match the required length with the door after cutting, tear 3M protective paper paste to the appropriate location
Matters Needing Attention: Confirm you have already cleaned dust before using, comperss it when pasting(if the temperature is low, it would be better if you use electric hair drier to heat the back adhesive ),because it's very cold, the rubber may get hard and compact

Material: silicone rubber
Size:
25 mm x 5 m/ 0.98 x 196.85 inch (W x L)
45 mm x 5 m/ 1.77 x 196.85 inch (W x L)
Color: translucent
 

Type 2：



120 Inch H Shape Weatherproof Glass Door Seal Strip Silicone Shower Door Sweep Stopper
Multi-function Seal Strip: Seal gap, effectively prevent water from overflowing in the bathroom and keep the bathroom clean. It is soundproof, dustproof, windproof, anti-mosquito, insect proof, etc
High Quality Silicone Seal Strip: Made of high quality transparent silica gel, non-toxic and environmentally friendly, without any pungent odor
Easy To Install: Adjust it to the required length with scissors, wipe the glass door, and stick the sealing ring on a clean surface (use glue, the effect is better)
Wide Range Of Sealing Strips: Suitable for shower doors, sliding doors, sliding doors, glass doors, door bottoms, suitable for 3/8" frameless glass (10 mm)
Suitable Length: 120inch (3m) length, to meet all the needs of the bottom and side of a door
 
Product philosophy
The combination of practical and beautiful appearance is our constant pursuit
Installation Notes:
1. Wipe the dust on the glass surface before use.
2. Secure the seal to the glass.
3. Put a drop of silicone sealant or silicone glass glue between the seal and the glass every 15 cm (both sides of the glass)
4. Dry for about 8 hours to ensure it is firm before use.
5.    Note: This package is not equipped with glue.