Center Tap AC Transformer
Input AC Voltage: 120V / 240V
Output AC Voltage: 24V or 12V + 12V
Current: 1000mA 1A max
Wire Leads: 100% copper, 6.5" long
Width: 50mm (75mm with tab)
Depth: 45mm
Height: 42mm
Net Weight: 13 oz
Primary:
- For 110V AC input, use one Red and Black wire.
- Insulate and DO NOT connect the other Red wire, since it will be Hot when you power the other Red wire. (DO NOT connect both Red wires together, or you will create a short circuit and damage the transformer!)
- For 220V AC input: use two Red wires. DO NOT connect the black wire.
Secondary:
- For 12V AC Output: use one blue and black wire (DO NOT connect the 2 blue wires together or you will create a short circuit and damage the transformer!)
- For 24V AC Output: use two blue wires
If you need DC voltage then you need a power supply not a transformer.
If you try to measure the output using the DC setting in your multimeter, it will not give you a voltage.
You need to set it to VAC in order to measure the output voltage.