Avantone Pro Active Mixcube 5.25" Active Audio Reference Monitor Single in Black

At Music Store Live we're all musicians like you, and we know how hard it can be to afford all the gear that you want and need.  We encourage you to make us an offer.  Often times, you'll be pleasantly surprised!  

Additionally, don't hesitate to contact us regarding financing options.  We'll do everything we can to help get that next piece of gear into your hands.

The Avantone MixCubes are shielded, full-range mini reference monitors. Their design is inspired by the legacy of the 5C Sound Cubes used in virtually all-major studios for the last 25 years.

Application
Active Recording / Mixdown Monitors

Engineering Objective
The Avantone Active Mixcubes are designed to be high-resolution, full-range powered mini-reference monitors for fixed or remote locations.
The secondary engineering facet was to create a timeless design that compliments a single full-range transducer.

Performance Objective
Studios primarily use 2-way & 3-way larger monitors designed to represent a wide range reference viewpoint at higher listening levels. However, in this newly developing age of High Definition Audio, there is still a need to also hear what your mix will sound like when played back over small “bass-challenged” systems such as televisions, clock radios, computers, car stereos, iPod docking stations, etc. It is important to make mixing judgments based partially on listening to reference monitors that will not impart tonal anomalies caused by crossovers or inferior full range drivers. Particular attention is always paid to the critical mid-range vocal/guitar/keyboard areas. This is where having a full-range monitor without a crossover is truly revealing. Ten months of R&D comparative listening & tweaking went into the voicing of the AVANTONE MixCubes. The result is a very smooth sounding, full range upgrade from the original 5C Sound Cubes. Listening tests reveal that the MixCubes have a smooth, more open, transparent top end response with extended bass while maintaining their basic original character.

Cabinet Design
The original 5C Sound Cubes™ were made of ½” particleboard covered with a glue-on wood grain contact paper. We chose to use thicker, denser MDF board because of its high rigidity and inherent low-resonance characteristics. We started with a 165mm (6 1/2") sealed cube design with radiused edges. We then chose an elegant Polyurethane high gloss “RETRO-CREAM” finish. The originals had either screws or on later models plastic binding posts mounted on a recessed plastic cup. We upgraded to high-end nickel plated, machined solid metal binding posts (Dual banana spacing) mounted on a black anodized ,milled and silk-screened aluminum terminal plate. Next we added a 7mm thick neoprene pad embedded into the base of the cabinet to serve as a skid-resistant acoustic isolator. Additionally, for creative mounting situations, we recessed an industry standard 5/8”-27 mic stand mount into the base.

Driver Design
The originals were a basic 5” stamped frame design. We designed a proprietary 5.25” die cast aluminum frame driver/cone assembly to exceed the performance of the originals. The mounting bezel is then polished for an elegant appearance. The paper cone, chosen for its musical character, is custom designed & crafted using the finest New Zealand pulp with mica fibers added for lighter weight & rigidity. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure.

Amplifier Design
We designed the amp module from the ground up to be a true professional-grade amplifier. It incorporates “overkill” concepts in component selection as well as safety. The result is a “no-compromise” amp with robust headroom characteristics that will rival the performance of much higher priced studio rack mount amps.

System Requirements

Specifications

System Type
Active (Self-powered) shielded full-range stereo pair  

Frequency Response
90Hz - 17,000Hz (useful musical range)

>Driver Impedance
Nominal 8 ohms

Max SPL
104db @ 1 meter = 1%THD (PINK NOISE)

Amplifier Type
Class A/B

Amplifier Power
60 watts RMS@ .005% THD (1KHz)

Amp Frequency Response
22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)

Noise
S/N -113 dB

Sensitivity
0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPL

Driver
Proprietary design 5.25" cast aluminum frame / paper cone / shielded

Cabinet
sealed / 18mm MDF / Dacron acoustical stuffing

Inputs
XLR & TRS (COMBO JACK) +4/Balanced and -10 unbalanced

Weight
7 lb 5 oz (per speaker)

Dimensions
165mm x 165mm x 165mm (6 1/2" x 6 1/2" x 6 1/2" in)

At Music Store Live, our goal is to revolutionize the way gear is bought online. It’s not just about videos and know how; it’s about the person on the other end of the line.  Whether you are in Tokyo or Toledo, we invite you to experience the reality of a living online music store and help us shape the best buying experience possible.  As you'll see in the video below, we're musicians just like you.  We strive to offer the best gear with the best online experience, and the best personalized service in the industry.  We strive to offer the best gear, the best online experience, and the best personalized service in the industry.

Free Shipping - Free Return Shipping - 30 Day Returns

At MusicStoreLive.com we are proud to offer free return shipping and a 30-day return policy in the 48 contiguous states on all new* items over $30. It's all part of our mission to bring the guitar shop to your living room. This policy allows you to get your gear hassle-free and try it with your own rig to be sure that it truly fits with your playing style and sound. If it doesn't work the way you had hoped we'll send you a prepaid return label and issue you a 100% store credit, once we get the item back in the same condition it was purchased. It's that simple.

If you wish to return an item for a refund, we will ask that you cover the cost of return shipping. Please contact us for the return shipping address as well as return authorization number. Please allow 7-10 days from the receiving date for returns to be processed.

• Your order must ship to the billing address associated with your credit card, PayPal, or other method of payment (unless an alternate shipping address has been approved by an MSL Gear Specialist).
• If you want the shipment to be held at a shipping company hub it is your responsibility to make those arrangements directly with the shipping company.
• An indirect signature will be required upon delivery for all transactions over $750. If you would like to require a signature on a transaction of less than $750, please request it when you place your order.
• We do not insure packages valued under $3,000. If you would like to add insurance for delivery or return please request it when requesting your order or initiating your return.
• All returns are subject to a Tech Check upon arrival. Any instrument that is returned with damage, wear and tear (including pick marks), missing or replaced parts, missing protective or packing materials are not eligible for a full refund.
• *Used / Vintage / Clearance items carry our same return policy, except with a 3­ day return window.

Please Note: Some products are not available for international shipping.