AZ20.png
Genset Controller Controller 186mmx142mm 200-10000Hz IP54 Parameters Monitor
DESCRIPTION


Features:
Brand new and high quality
Made of high-quality materials, sturdy and
Generator set controller DC60D series
This series of controllers are suitable for starting, stopping, parameter monitoring, fault checking and data setting of diesel/gasoline/gas generator sets.
The controller uses a 4.3-inch TFT color LCD display and a new UI design, which can directly display relevant faults. All parameters can be displayed via analog indicators and text. In addition, the LCD screen can display various faults, and once the generator set cannot work normally, it will shut down.
There are Chinese/English interfaces to choose from, and more languages can be set according to user requirements. All parameters can be configured via the front buttons or adjusted via PC using the RS485 or USB programmable interface. It can be widely used in various types of generator set automatic control s.
32 units use microprocessing technology.
4.3-inch TFT color large-screen LCD display, optional language interface (Chinese/English), users can set the language as needed.
Indicators and numbers are displayed through the UI interface.
Made of acrylic material to protect the screen.
silicone board
USB interface: Parameters can also be set through the USD interface in the power-off state for real-time monitoring.
Various parameters are displayed.
Input and output functions and status are directly displayed.
More categories of surface settings.
Built-in real-time clock: can preset time operation and automatic maintenance. Genset work schedule can be set to weekly or monthly.
Three-level protection countdown function, the maintenance time or date can be set.
Recording function: record relevant faults in real time.
There are 6 relay outputs in total, 4 of which can be configured by yourself. Each relay can have up to 25 functions. There are also 4 groups as non-contact terminals.
5 channels of switch input, each channel can be set up to 30 functions.
3 sensor analog input interfaces, 6 configurable input types, and multiple units can be set.
Battery charging control function can protect the battery according to the battery voltage status.
The sensor is customizable via front buttons or PC software.
Compatible with 3P4W, 1P2W, 2P3W (120V/240V, 50/60HZ)
A variety of crankshaft conditions (speed, frequency, oil pressure) to choose from
Control and protection: automatic start and stop of the generator set, load switching (ATS control) and complete fault display and protection.
Standard waterproof rubber gasket. Waterproof up to IP54
Modular design: All connections use European connectors, making installation, connection, maintenance, and replacement more convenient.
Parameter display:
Engine speed
engine oil pressure
Engine water temperature
engine fuel temperature
engine cylinder temperature
Engine oil tank temperature
Engine fuel level
Engine battery voltage
Charging voltage
Mains frequency (DC62D only)
Mains phase voltage L-N (only applicable to DC62D)
Mains phase voltage L-L (only applicable to DC62D)
Generator 3 phase voltage L-N
Generator 3 phase voltage L-L
Generator three-phase current A
Generator frequency Hz
Generator power factor COSφ
Generator active power KW
Generator apparent power KVA
Generator reactive power KVar
Current loading rate %
Overall average load rate %
Current consumptionKWH
Total power consumption kWh
total startup time
Current running time
total running time
Level 3 maintenance instructions
Protect:
speeding
below speed
Low oil pressure
High water temperature
High oil temperature
High ba rrel temperature
Tank temperature is high
Low fuel level
low oil level
External emer gency alarm
D+ is open
Loss of speed
Sensor open circuit
Overclocking
low frequency
Overvoltage
Undervoltage
Overcurrent
Current imbalance
super power
missing phase
reverse phase sequ ence
Generation load failure
Power generation unloading failed
Power load failure
Mains power unloading failure
Primary maintenance due
Secondary maintenance due
Maintenance due
Low water level alarm
emer gency stop
Crank failure
Battery voltage is too high
Insufficient battery voltage
Charging failed
Battery charging failed
Stop failed

Specification:
Working voltage: DC8V----36V continuous
energy consumption:
Standby: 24V: Max 1W
Operation: 24V: 5W max
AC voltage input:
1P2W 30VAC-276VAC(ph-N)
2P3W 30VAC-276VAC(ph-N)
3P4W 30VAC-276VAC(ph-N)
Speed sensor frequency: 200-10000Hz
Maximum accumulated time: 99999.9 hours (minimum storage time: 6 minutes)
Fuel relay output: 16Amp DC+VE supply voltage
Start relay output: 16Amp DC+VE supply voltage
Programmable relay output 1:5Amp DC+VE supply voltage
Programmable relay output 2: 5AMP non-contact-normally open-normally closed output
Programmable relay output 3:5AMP non-contact normally open output
Programmable relay output 4:5AMP non-contact normally open output
Excitation output: Maximum 1AMP DC+VE supply voltage
Switch input: available when connected to battery -
Working conditions: -20-65 degrees Celsius
Storage conditions: -40-85 degrees Celsius
Protection level
IP54: When a waterproof rubber gasket is added between the controller and the panel
Overall dimensions: 210mm*160mm*50mm (approximately)
Panel opening: 186mm*142mm (approx.)
Weight: 0.88kg (approx.)

Package Included:
1 x DC60D generator set controller
2 x mounting screws
1 x user manual

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

POLICES

 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.