Manufacturer: Edelbrock
Part Number: 7177
Condition: New
Product Description:
Camshaft/Lifter Kit
Performer RPM Camshaft Kit
Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;
- Engine Make/Size: Mopar 318-360
- Exh. Duration @ .050 in. (Deg): 244
- Exh. Duration Advertised (Deg): 318
- Exhaust Valve Lift: 0.510 in.
- Intake Duration @ 0.050 in.: 234 Degree
- Intake Duration Advertised: 308
- Intake Valve Lift: 0.488 in.
- Lifter Type: Hydraulic Flat Tappet
- RPM Range: 1000-7000
- Usage: Street/Performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: WARNING: This product can expose you to Chromium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.
- Designed for 1500 to 6500 RPM Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 To 12 in. Of Manifold Vacuum At Idle
- More Lift And Duration Than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno-Matched/Street-Proven Performance
- Take the Guesswork Out of Camshaft Selection!
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees- Lift @ Valve Intake: .488"- Lift @ Valve Exhaust: .510"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees
When you design and sell the best-engineered performance products in the world, you have to have a rigorous testing program. Why? Without adequate testing, there's no way to stand behind your product with confidence. That's why every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Our three Super Flow computerized engine dynos are capable of measuring 11 separate engine variables up to speeds of 12,000 rpm. For 2007, we added a new Super Flow SF902 engine dyno. It's fully automated and programmable to simulate various driving situations, and is equipped with WinDyn software for the very latest in testing equipment. For real-world tuning, there's our Super Flow model SF-840 eddy-current chassis dyno that can handle up to 1,000 hp at the wheels and speeds of 200 mph. When all testing is completed, the results evaluated, and the part has passed all performance criteria, then, and only then, is the product deemed ready for production. These precise testing procedures are applied to the entire Edelbrock line for performance that's guaranteed. Edelbrock test vehicles are driven by Edelbrock engineers and employees to get a "real world" feeling for the performance improvements. Our products are also tested and used by professional race car teams and drivers. Working with these talented individuals is just another extension of our research and development process so when we say "proven performance" we really mean it! Top racing teams in all forms of motorsports rely on Edelbrock to produce parts that they can count on to win races and championships. Further underscoring our commitment to the racing community, Edelbrock is the only aftermarket intake manifold manufacturer licensed by NASCAR.
Additional Information:
DISCLAIMER: All product data including title, description, compatibility table, and photos have been provided by a third party listing tool and may contain typographical errors. Please refer to the manufacturer's website to verify the part number will fit your vehicle before purchasing.
Guaranteed Fitments:
Please check the compatibility tab to confirm if this part will fit your vehicle. If the compatibility tab is unavailable and you are unsure whether this part will fit your vehicle, please contact us before purchasing.
=============================================
SPARKTEC MOTORSPORTS EBAY STORE POLICIES
=============================================
Payment:
Click the Buy It Now button to safely and securely proceed to checkout. We accept all major credit cards and PayPal. The Sparktec Motorsports eBay Store requires immediate payment.
Sales Tax:
We are required to collect sales tax whenever applicable in accordance with marketplace facilitator laws.
Shipping:
FREE Standard Shipping within the contiguous United States. Most orders will ship the same day or the following business day. Please review our shipping policy for handling time and estimated delivery dates. Any address outside of the contiguous United States, please contact Sparktec Motorsports for a shipping quote.
Processing begins as soon as an order has been placed, therefore we cannot change, cancel or modify orders once they have been confirmed. To return any unwanted items, please review our return policy for return and exchange instructions.
Delivery Time:
Once your order ships, please allow an additional 1-5 business days for delivery. Tracking information will be provided to you within 24 hours of shipping out. Because our products ship from warehouses and manufacturers across the US, exact shipping method and times will vary by item.
Customer Service:
To contact us with questions/comments, please e-mail us using the "Contact seller" link. Most e-mails are answered within 24 hours, including weekends and holidays.
Returns:
Sparktec Motorsports' eBay Store allows returns of any item, in new and unused condition with original packaging, within 30-days of receiving the item for a refund or exchange. Absolutely NO returns or exchanges allowed on products that have been used, installed, mounted, or missing components. All non-defective returns are subject to a 15% restocking fee. All returns must be accompanied by a Return Merchandise Authorization (RMA) number which can be obtained by contacting us. Any products returned without a Return Merchandise Authorization (RMA) number will be refused. Please contact us in the event you're not satisfied with your purchase as we are more than happy to work with you to ensure a positive experience.
