Meonum 4 Set Blow Mold Light Kit Replacement, E27 E26 Single Light Cord Kit with Switch Fuse Plug, for Indoor Outdoor Halloween Christmas Village House Craft Decorations and Salt Lamp


Product Details

  • Brand: Meonum
  • Connector Gender
  • Voltage: 125 Volts
  • Wattage: 660 watts
  • UL Listed: No
  • Package Dimensions: 9.45 x 4.65 x 2.64 inches
  • Item Weight: 13.1 ounces
  • Date First Available: June 10, 2023
  • Manufacturer: Meonum
  • Country of Origin: China
  • Blow Mold Light Kit Replacement: our blow mold light replacement kit does not include a bulb, you can choose to use LED bulbs or incandescent lamps, the socket can hold up to 250V 660W bulb, avoiding burns and objects melt, safe to use even for children; Better for your Halloween and Christmas outdoor blow mold light decoration
  • Combination Design: if you are still bothered by the complex wiring of the Christmas village house, still worried about the wiring of the many blow mold figures lights, no need to worry from now on; 4 pack combination set, individually packaged, so you do not have to worry about wiring problems and safety issues, to meet your diverse needs
  • Accessory Cord with Switch: there is a switch installed on the single light cord, you can control the blow molded light at will through this switch, the plug 125V 5A meets the American standard, easy to plug in and pull out; And the plug has 2 pieces of fuses built in to ensure your absolute safety during use
  • E27 Bulb Socket: E27 bulb socket with good heat dissipation, not only for large outdoor blow molded lamps, but also for indoor salt lamp pumpkin lamps and Xmas craft replacement light, long time use will not melt, can be applied many times, it can also be applied as a spare part to help relight your old vintage blow molds
  • Specifications Information: the accessory cord has a bulb socket size of 27mm, fits E27/26 bulbs and has a 5 feet cord with an on/off switch; The plug contains 2 pieces of fuse wire and a 3.5 inch base to help hold the bulb in place, suitable for a variety of Christmas village lights pumpkin lights salt lamps and blow molded lights

Accessory Cord with switch 5ft Blow Mold Light Replacement kit, E27/26 socket plug with 2 Spare Fuse for Halloween and Christmas Decorations, Craft Village House Decoration How to use? 1. Turn off the power before installation. 2. Install E26/27 light bulbs. 3. Snap the socket into the chassis. 4. Put plug into outlet, turn on the power. 5. Using in line gear switch to on/off the bulbs. Specifications: Materials: plastic/metal Socket: E26 E27 Socket Size: 27mm Socket Power: 660W Socket Voltage: AC250V Plug Voltage: AC125V Plug: 2 Pole Polarized plug Controller Type: ‎Touch Control Cord Length: 5 Feet Package includes: 4 x Accessory cord with switch 4 x Round fixed chassis 4 x Synopsis Warm note: 1. Make sure the power is off before installation. 2. Install and use this product please according to your local electrical codes and regulations. 3. Without bulbs. Note: The brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Meonum.