Ship from Door to Door
Standard Accessories:
All controlled by the electric valve
DC Motor
Automatic thermostatic water supply system
Compensate Wider Dental Unit
Handpiece tubing with standard fittings (3sets)
Three way springe (one for hot ,one for cold)(2sets)
Water suction and saliva ejector (1set)
Powerful suction (HVE) apparatus (1set)
Easy cleaning Integral ceramic spittoon
Built-in Water purified system with bottle
Strong and weak dual-purpose operation light (1set)
Low-tension X-film viewer (1set)
Spirit lock tight Equilibrium Device
Doctor stool (1set)
Suitable for adult and children headrest
Foot pedal (1set)
Gross weight: 200 Kg
Specifications:
Model: TJ2688 A1
Supply Voltage (110V 50Hz )
Air Pressure (>0.55Mpa)
Water Pressure (0.2Mpa-.04Mpa)
Lowest position of Dental chair (17.32”)
Highest position of Dental chair (33.86”)
Highest smallest angle of Dental Chair ( 5°)
Lowest smallest angle of Dental Chair ( 85°)
----------------------------------------------------------------
X Ray Machine
FEATURE:
1.Compatible with digital sensors, X-ray film, and image plate scanners.
2.Small and portable.
3.This portable dental X-ray machine is high frequency machine.
4.The body is small, light in weight, and the radiation leakage is less than 20μgy/h.
5.It has excellent image quality, portable storage, save more space.
6.It uses high frequency and DC international power supply.
7.All of the components installed in the central PC board concentrated. Shock,set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection.
8.Different exposure times are preset for adults and children.
9.The battery is durable, it can take about 4 hundred images after fully charged.
TECHNICAL SPECIFICATIONS:
1.Tube voltage:60KV
2.Tube current:2mA
3.Exposure time:0.1-2.0S
4.Frequency:30kHz
5.Rate power:120VA
6.Distance from skin to cone:105mm
7.Tube focus:0.8mmx0.8mm
8.Battery:DC14.8V 1600mAh
9.Charger input voltage:AC100V-240V+10%
10.Output voltage:DC16.8V
11.Ambient temperature:5℃~40℃
12.Relative temperature:<75%RH
-----------------------------------------------------------------
Sensor 1.0/2.0
Feature:
Hardware and software requirement:
Processor :1.0GHz or above
Memory :2GB or above
Hard disk :64GB or above
Display resolution :1440*900 or above
USB port :USB2.0
Operating system :Windows 7、Windows10、Windows11
Technical parameter:
|
S1 |
S2 |
Detector Technology |
APS CMOS |
APS CMOS |
Scintillator |
CsI |
CsI |
Theoretical Resolution |
25lp/mm |
25lp/mm |
True Resolution |
20lp/mm |
20lp/mm |
Pixel Matrix |
1000*1500 |
1300*1800 |
Active Area(mm) |
20*30 |
26*36 |
Mechanical Size(mm) |
25.4*38.2*4.4 |
30.4*44*4.4 |
Data interface |
USB 2.0 |
USB 2.0 |
AD Conversion(bit) |
16 |
16 |
Protection |
IP68 |
IP68 |
Packing list:
1. Sensor
2. USB flash disk (Software)
3. Protective sleeve
-----------------------------------------
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.