Bigger and Higher Resolution Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 4096*2560, which can display the models' tiny details. Ultra-Large Screen Protector The ultra-large scratch-resistant screen protector helps to prevent screen scratches and resin penetration. With up to 95% light transmittance, it can fully protect the LCD screen while ensuring printing accuracy. Larger Print Volume Empowers Your Creativity Photon Mono 2 3d printer offers a 165x89x143mm (HWD) printing size and 2.09L maximum printing volume with high accuracy, making it a precise choice for creators. Upgraded LighTurbo Matrix The upgraded LighTurbo matrix provides a stable and uniform parallel light source, thus effectively reducing the layer lines and eliminating grid lines. Therefore, Photon Mono 2 can make the model details more vivid and make the model surface delicate and smooth. Anycubic Photon Workshop The new version of the slicer has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting, and model arrangement. It has a more straightforward slicing process and a new UI interface that is easier to operate. Laser-engraved Build Plate Photon Mono 2 adopts laser engraved platform. It has excellent flatness, which can increase model adhesion and greatly improve printing success rate. Laser engraved platform makes the model hard to drop and warp.   Parts List Funnel Gloves Mask Screen protector Platform Power adaptor Resin vat Levelling paper Scraper USB drive Tool set

---

Models Display

 
 
 

---

ANYCUBIC Wash and Cure 3.0. Newest Uparaded Volume 2 in 1 Wash and Cure Station. with Gooseneck Lights. for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer Washing Size of 165 x 100 x180 mm

• 【Larger Size for Upgraded Capacity】Compared to Anycubic Wash & Cure 2.0, Wash and Cure 3.0 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models.
•  
• 【Gooseneck light design】The "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.
•  
• 【Dual-layer Design, IPA Saving】The double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage.
•  
• 【Enhanced Curing Power】By utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model.
•  
• 【Quiet and Simple】Cleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment.

 
 
 
 
 

---

ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer

• 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
  
  
• 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
•  
• 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
•  
• 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
•  
• 【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.

 
 

Powerful Curing Light Source

 
 
 
 
 
 
 

---

ANYCUBIC Wash & Cure Max, 14.9L Ultra-Large Wash and Cure Station, Dual-Cleaning Mode, Detergent Saving 50%, Compatible with Photon Mono Saturn Halot LCD SLA DLP 3D Printer

• 【Amazing Wash & Cure Sizes】, ANYCUBIC wash & cure max can hold up to 14.9 liters (15.7 qts.). The impressive maximum cleaning size of 11.8’’ x 6.5’’ x 11.8’’ (300*165*300mm), is compatible with all ANYCUBIC resin printer, and works well with consumer-grade resin 3D printer measuring 13.6'' and below available on the market.
•  
• 【Dual Cleaning Mode】, the adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning to 3d prints. Spray cleaning eliminates residual resin from the print surface with powerful mechanical jets, while dip rinsing effectively removes resin from intricate details on the underside, cleaning in one pass.
•  
• 【Detergent-Efficient】, Wash & Cure Max's full cleaning process requires only 4L of detergent to be prepared and can be recycled with no direct contact throughout, saving more than 50% on detergent compared to traditional wash and cure station. One bucket of detergent supports the cleaning of 20 models of 10.1" height, and the loss of alcohol in a single cleaning process is less than 50ml.
•  
• 【One-click Washing and Curing】,The cleaning and curing process is scientifically set up at the factory, just click the auto button and start it, the wash & cure max will automatically cure the 3d models after cleaning them. Experience streamlined model processing that saves you time and effort.
•  
• 【360° Dimensional Curing】, Featuring a 360° automatic rotating curing platform, this machine provides higher curing energy values and longer irradiation distances, enabling comprehensive, efficient curing for your models.

 
 
 

 
 
 
 
 
 

---