RA 0109
Amalgam polishing kits RA 0109 Used for low-speed
Kit Profile:9 rubber polishers
1. RF 320 2 Black cup-shaped polisher
2. RF 341 2 Black knife wheel polisher
3. RF 313 2 Black pointed polisher
4. RF 320 4 Brown cup-shaped polisher
5. RF 341 4 Brown knife wheel polisher
6. RF 313 4 Brown pointed polisher
7. RF 320 5 Blue cup-shaped polisher
8. RF 341 5 Blue knife wheel polisher
9. RF 313 5 Blue pointed polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed,
the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:30000-35000;
According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: recommended speed:30000-35000;
According to different parts,you can choose 4, 5 and 6 different shape polishers for fine
Third step: recommended speed:30000-35000;
According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.
RA 1112
Usage:
Soft silicone polishers and diamond polishers for composite materials, preparation and high gloss polishing
Instructions:
1. For dental clinic low speed bent hand piece.
2. Don’t use the products to sharp part,, or it will damage the abrasive material.
3. Do not need to use with the polishing paste, do not need to apply too much pressure, Touch intermittent natural abrasive
Steps:
1. Red ring (white ceramic grinder)= 1st step: Removing and contouring. Rec. 10,000-12,000 rpm.
2. Yellow ring (blue silicone polisher)= 2nd step: Smoothing and pre-polishing. Rec.10, 000-12,000 rpm.
3.White ring (light pink diamond polisher)= 3rd step: High gloss polishing.Rec 7,000-10,000 rpm
RA 0309
Feature:
1 KIT in total
Kit Profile:3 ceramic polishers and 6 silicone rubber polishers
1. CW 306 4 White pointed polisher
2. CW 311 4 White cone polisher
3. CW 351 4 White ball polisher
4. SH 320 3 Pink cup-shaped polisher
5. SH 341 3 Pink knife wheel polisher
6. SH 313 3 Pink pointed polisher
7. SH 320 4 Light blue cup-shaped polisher
8. SH 341 4 Light blue knife wheel polisher
9. SH 313 4 Light blue pointed polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:15000-20000;
According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: recommended speed:15000;
According to different parts,you can choose 4, 5 and 6 different shape polishers for fine polishing.
Third step: recommended speed:15000;
According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.
HP 0412
Feature:
Kit Profile:12 silicone polishers
1.SK 213 2 Black pointed polisher*2
2.SK 214 2 Black pointed polisher
3.SK 202 2 Black bullet polisher
4.SK 213 3 Green pointed polisher*2
5.SK 214 3 Green pointed polisher
6.SK 202 3 Green bullet polisher
7.SK 213 5 Yellow pointed polisher*2
8.SK 214 5 Yellow pointed polisher
9.SK 202 5 Yellow bullet polisher.
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed,
the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:15000-20000;
According to different parts,you can choose 1,2 and 3 different shape polishers for rough
Second step: recommended speed:10000-15000;
According to different parts, you can choose 4,5 and 6 different shape polishers for fine
Third step: recommended speed:8000-12000;
According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine
HP 0312
Feature
Kit Profile:12 silicone polishers
1. SH 212 2 *2 White pointed polisher
2. SH 241 2 *2 White knife wheel polisher
3. SH 232 2 *2 White wheel polisher
4. SH 212 3 Pink pointed polisher
5. SH 241 3 Pink knife wheel polisher
6. SH 232 3 Pink wheel polisher
7. SH 212 4 Light Blue pointed polisher
8. SH 241 4 Light Blue knife wheel polisher
9. SH 232 4 Light Blue wheel polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:25000;
According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: recommended speed:15000-30000;
According to different parts,you can choose 4, 5 and 6 different shape polishers for fine
Third step: recommended speed:10000-20000;
According to different parts, you can choose 7, 8 and 9 different shape polishers for super-fine.
RA
Description:
Dental rotary grinding and polishing instruments
1. Diamond impregnated 3-stage polishing system Coarse/Medium/Fine
(1. Smoothing. 2. Pre-polishing. 3.High-gloss polishing)
2.Best results, high efficiency
3.Applicable on composite,ceramic and Zircon
4.Recommend speed:7,000-12,000 rpm/min
Package:
6pcs/set
Flame Stone/Cone Stone/Round Stone
Flame shape/Cone shape/Round shape
Aluminum Oxide
Recommended R.P.M:7,000-10,000/min
Special for dental clinic metal,resin and porcelain
12pcs/pack
Five sizes:
Red:Super coarse
Blue:Medium coarse
Gray:Fine
Yellow:Extra Fine
White:Ultra Fine