ZC-T3-1-K DN50 DN65 DN80 Smart Ultrasonic Water Flowmeter Flow Tester Agricultural Irrigation Usage Intelligent IP65 RS485

Specification:

The ZC-T3-1-K series Smart ultrasonic water meter is a new generation of smart water meter designed for agricultural irrigation and water resource monitoring. It is an all-plastic smart water meter with nylon as the main material. It is installed in the pipe by clamping the meter body which is only 50 mm in thickness between the two flanges of the pipe.

The new generation of ZC-T3-1-K series ultrasonic water meter uses a technology similar to that of FLEXIM company’s ultrasonic flowmeter. The transit time difference is obtained through correlation calculation of captured signal waveform, thus featuring high precision, low drift, anti-interference, stability and reliability. The smart water meter also uses a signal acquisition hardware with a dynamic range of 30dB, so it can resist medium scaling inside the pipe and is suitable for measurement of muddy water with sediments. This smart water meter adopts waterproof sealant and can be immersed in water.

Compared with the traditional water meter, the new meter is smaller in size, lower in failure rate, more reliable in function and cheaper in price.

Main Features:

1. Low initial velocity to 1 mm/s, low zero drift (value to be determined)

2. Display: multiple lines display simultaneously 9-bit long accumulator, 6-bit long instantaneous quantity, signal strength, battery status, flow direction, fault, communication status, etc

3. Flow unit selectable: cubic meter, American gallon, liter, cubic foot, acre foot

4. Operation: double capacitor touch button, support sliding operation

5. Output: optional 2-channel OCT outputs, which can simulate the double-pulse output of mechanical water meter

6. Communication interface: independent RS485 and infrared interface. Baud rate selectable 2400, 4800, 9600 Optional MBUS
interface, Lora/ NB-iot wireless communication and USART interface

7. Communication protocol: support MBUS, MODBUS, ASCII and CJ188 at the same time

8. Pipe diameter: DN50~DN150

9. Power supply: 3.6V4Ah disposable lithium battery power, >6 years of service life

10. In-field software upgrading: yes

11. Data retention time after power failure: 10 years

12. Technology applied: single channel ultrasonic principle, waveform analysis, correlation calculation, signal amplitude adaptive.

13. This product is a one-time product, and the defective products can only be replaced without repair within one year.

Specification:

Executive standard	ISO 4064-2005、GB/T 778-2007、JJG 162-2009
Measuring fluid	Water, raw water, sea water, and filled pipes
Pipe diameter	DN50~DN150
Accuracy	1%
Fluid temperature	0.1℃~+30℃
Work environment	Temperature: - 10 ℃ ~ + 45 ℃; humidity ≤ 100% RH
Under pressure	1.6Mpa
Communication interface	RS485 / USART / IR
Power supply	Built in lithium battery (3.6V, 19ah) / external DC8 ~ 36V DC power supply / two wire 4 ~ 20mA power supply
Protection level	IP68 can work 2 meters underwater
Local display	Double line display includes 9-bit cumulant, 4-bit instantaneous flow, unit and various status prompts
Data storage	EEPROM / flash storage parameters are used to automatically record the cumulative flow of the first 128 months and the first 512 days
Current measurement period	Measurement status: 1 time / S; verification status: 4 times / s
Power waste	The battery can be used for more than ten years

Packing List:

Ultrasonic water meter  1Pcs  (DN50 DN65 DN80 Optional)

Pictures And Details: