Applicable Model:Fit for 1980-1980 Suzuki GS550Fit for 1980-1980 Suzuki GS550EFit for 1981-1981 Suzuki GS550TFit for 1981-1982 Suzuki GS650EFit for 1981-1983 Suzuki GS650GPlease refer to the adaptation table for the specific model.Intake Manifold Definition：The intake manifold is located between the throttle and the intake valve of the engine. After the air enters the throttle and passes through the manifold buffer, the air flow path is divided here. The intake manifold interface is the interface that connects the intake manifold to the engine block and is installed at the intake manifold port.Fault Feature:If the intake manifold interface is broken, it may cause high idle speed, low acceleration, and easy to extinguish when accelerating. Replacing the new...

HOME PAGE

Visit my Store to see new items that you like

Intake Manifold Carb CARB Boot Fit for 1980-1981 Suzuki GS550E/550T Right Left

Applicable Model:
Fit for 1980-1980 Suzuki GS550
Fit for 1980-1980 Suzuki GS550E
Fit for 1981-1981 Suzuki GS550T
Fit for 1981-1982 Suzuki GS650E
Fit for 1981-1983 Suzuki GS650G
Please refer to the adaptation table for the specific model.
Intake Manifold Definition：
The intake manifold is located between the throttle and the intake valve of the engine. After the air enters the throttle and passes through the manifold buffer, the air flow path is divided here. The intake manifold interface is the interface that connects the intake manifold to the engine block and is installed at the intake manifold port.
Fault Feature:
If the intake manifold interface is broken, it may cause high idle speed, low acceleration, and easy to extinguish when accelerating. Replacing the new intake manifold interface at this point can solve these problems.
Feature:
This product is made of high quality rubber and is durable. It has the advantages of high temperature resistance, high pressure resistance and corrosion resistance.
Installation:
Easy to install, directly replace the old or broken intake manifold interface when installing.
Note: Tools (including other tools such as screwdriver wrenches) may be required. It takes about 30 minutes to an hour. You can also go to the local modification store or garage to install.
Installation Step:
To install the intake pipe, you need to remove the carburetor.
1.First remove the seat cushion, loosen the fixing screws of the air filter, and move the air filter to the rear.
2. then you can easily remove the carburetor, and finally remove the intake pipe.
3. If it is Euro 2 type, the intake pipe screw may need to be removed with an impact screwdriver.
4. There should be a rubber O-ring in the aluminum groove behind the intake pipe. You can replace the original one or replace it with a new one.
5. Do not start immediately after installation, wait until the oil in the oil pipe enters the carburetor and start again.
Package Include:
4×Intake manifold boot
4×Hose clamp
4×Gasket



Shipping

Payment

Returns

Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.

About Us

This is happy19star. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!

Contact Us

If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.

HOME PAGE

Visit my Store to see new items that you like

content_src_url

Hot Item
Intake Manifold Carb CARB Boot Fit for 1980-1981 Suzuki GS550E/550T Right Left

Applicable Model:
Fit for 1980-1980 Suzuki GS550
Fit for 1980-1980 Suzuki GS550E
Fit for 1981-1981 Suzuki GS550T
Fit for 1981-1982 Suzuki GS650E
Fit for 1981-1983 Suzuki GS650G
Please refer to the adaptation table for the specific model.
Intake Manifold Definition：
The intake manifold is located between the throttle and the intake valve of the engine. After the air enters the throttle and passes through the manifold buffer, the air flow path is divided here. The intake manifold interface is the interface that connects the intake manifold to the engine block and is installed at the intake manifold port.
Fault Feature:
If the intake manifold interface is broken, it may cause high idle speed, low acceleration, and easy to extinguish when accelerating. Replacing the new intake manifold interface at this point can solve these problems.
Feature:
This product is made of high quality rubber and is durable. It has the advantages of high temperature resistance, high pressure resistance and corrosion resistance.
Installation:
Easy to install, directly replace the old or broken intake manifold interface when installing.
Note: Tools (including other tools such as screwdriver wrenches) may be required. It takes about 30 minutes to an hour. You can also go to the local modification store or garage to install.
Installation Step:
To install the intake pipe, you need to remove the carburetor.
1.First remove the seat cushion, loosen the fixing screws of the air filter, and move the air filter to the rear.
2. then you can easily remove the carburetor, and finally remove the intake pipe.
3. If it is Euro 2 type, the intake pipe screw may need to be removed with an impact screwdriver.
4. There should be a rubber O-ring in the aluminum groove behind the intake pipe. You can replace the original one or replace it with a new one.
5. Do not start immediately after installation, wait until the oil in the oil pipe enters the carburetor and start again.
Package Include:
4×Intake manifold boot
4×Hose clamp
4×Gasket



Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.

This is happy19star. We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!

If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.


All rights reserved.