MATCH PP 72W-D 6.5" pair Subwoofers

MATCH PP 72W-D
You didn't find the type of enclosure sub you are looking for? – If none of the MATCH Plug & Play enclosure subs fits in your car with respect to shape and / or size, then you have the chance to build your “personalized” version by yourself. Therefore, we offer the single woofers of our Plug & Play series, which are 100 % identical to the drivers that are used in the pre-loaded variants. As long as you choose the net volume and port tuning frequency according to the installation instructions, we guarantee the same acoustical performance as our “standard” subwoofers.
Features
Extremely stiff, hand-scooped paper cones
High-temperature resistant voice coils with large winding heights
Double ventilated voice-coils for minimum compression effects
Powerful magnets for compact-sized vented enclosures
Optimized for the perfect interaction with MATCH Plug & Play amplifiers
Connection terminal for MATCH subwoofer cable (PP-SC) included in delivery
Technical data
Power RMS / max. P 100 / 200 Watts
Impedance Z 2 x 2 Ω
DC resistance Re 2 x 1.6 Ω
Resonance frequency Fs 53 Hz
Mechanical Q factor Qms 3.30
Electrical Q factor Qes 0.41
Total Q factor Qts 0.37
Compliance Cms 350 µm/N
Equivalent air volume Vas 7.9 L
Force factor B*I 8 Tm
Efficiency 1 W / 1 m SPL 87 dB
Cone area Sd 125 cm²
Moving mass Mms 25 g
Cone material Hand-scooped paper cone
Mechanical resistance Rms 2.5 kg/s
Voice coil diameter ø 38.8 mm
Voice coil winding height 16 mm
Max. linear excursion Xmax +/- 5.0 mm
Outer diameter ø 157.5 mm / 6.20"
Installation diameter ø 133 mm / 5.24"
Installation depth 79 mm / 3.11"
Recommended enclosure volumes For two subwoofers
Sealed box Not recommended
Net volume -
Lower limiting frequency (-3dB) -
Vented box
Net volume 15 L
Port diameter ø 70 mm / 2.76"
Port area 38 cm²
Port length 20 cm / 7.87"
Port tuning frequency Fb 50 Hz
Lower limiting frequency (-3dB) 48 Hz
Scope of delivery
2 x Subwoofer MATCH PP 72W-D
1 x Plug & Play connection terminal