Optional PoE Power Supply - Supports 802.3AF/AT active PoE and passive PoE, transferring data and charging
the product with a single Ethernet cable, so you can install the product outdoors where power outlet is not available.
Note: The PoE converter is not waterproof. Please use CAT5E or above cable and the length should not exceed 100m/328ft.
Seamless WiFi Roaming - The 4x8dBi omnidirectional antennas and two built-in high-power amplifiers provide extreme
WiFi coverage and penetration. Also supports Mesh technology, one-click brings more device connections,
greatly expanding the WiFi coverage, and eliminating every network dead zone.
Specification
- Model: WL-WN573HX3
- Product Size(without antennas): 24x24x7cm/9.4x9.4x2.8in
- PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in
- Length: Antennas - 40cm/15.7in; Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in
- Product Weight(without antennas): 1109g/39.1oz
- Standard: IEEE 802.11 ax/ac/a/n/g/b
- Frequency Band/Speed: 2.4GHz(573Mbps)+5GHz(2402Mbps)
- Wireless Security: WPA2-PSK, WPA2/WPA3-MIX
- Antennas: 4 x 8dBi Omnidirectional Antennas
- PAIR/RESET LED: Blue
- PoE Converter Status LED: Green
In the Box
1 x AX3000WiFi 6 Outdoor Access Point
4 x Omni Antennas
4 x Cable Ties
1 x Ethernet Cable Connectors
1 x Quick Installation
1 x Wrench
2 x Silicone Pads
Several Screws
Passive PoE(Optional):
1 x 54V Power Adapter
1 x PoE Converter
1 x Ethernet Cable
Warm Tips
①The PoE converter is not waterproof, please install it indoors.
②Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.
③Please install the product 2-3 meters above the ground for better performance.
④Under the mesh mode, WN573HX3 supports interconnection with WN586X3, WN572HP3(*Latest firmware required) and WN573HX3.
How to install antennas and Ethernet cable?
①Pass the RJ45 cable through the waterproof connector cover.
②Screw the waterproof seal into the waterproof connector bracket.
③Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
④Put the waterproof sealing ring on the waterproof connector bracket.
⑤Connect the RJ45 cable to WAN/LAN port.
⑥Screw the connecting cable into the 2.4G and 5G antenna connector and screw up the connector.
Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E
or above certified and shorter than 100m/328ft.
How to install the product on a column?
①Stick two silicone pads on the bracket and post respectively.
②Thread the cable ties through the fixing point of the bracket.
③Fix the product to the post with cable ties.
1. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back.
Please contact me before you return it.
2. For all return products customers MUST contact us for the returning address.
3. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number,
specific reason for the return, and your eBay ID.
4. If you need return, please check twice to confirm the item not work and contact our customer service representative,
let us know the detailed problem and send us some pictures for confirmation. Then get a unique address for return.
1.Welcome to Wavlink, we are the leading Design product manufacturer that provides Display solutions,
TV and capture solutions, Wireless and networking solutions, High end PC accessories products.
2.We always pride ourselves on providing the outstanding service and high quality products, make our customer feel confident buying online.
3.By shopping with us, you can get the latest technology for the best price.
1.Please contact us via ebay message if you have any problem.
2.ALL replies will be sent to your email , if you don't get response within 1 business days,
please check your spam box or E-mail us again to avoid any delay!