Extend the motherboard's mSATA slot to 7PIN connector. This adapter board simply connects the signal from the MSATA connector to the 7PIN connector, so the adapter card does not need driven. If the hard disk can not be recognized, please check if it's MINI interface, the card is basically not faulty, please know. This card supports half-height and full-height. If you want to use half-height, just cut it along the V-CUT line in the middle of the PCB.

Features:
1. This adapter card can be used to transfer any device to the mSATA card slot. (Data line 7pin, ned another power line).
2. Support host mSATA slot. Do not support Mini PCIe slot, can be used for air SSD card.
3. Extend 7pin interface through mSATA.
4. Suitable for any system.
5. No drive required.

Specifications:
Product Name: mSATA to Adapter
Product Model: MPCE1ST-N03
Product Package: Electrostatic Bag
Product Interface: MSATA 7PIN
Support System: For WinXP/Vista/Win7/Win8 32-bit/64-bit MAC10.8 or higher
Size: Approx. 5*3*0.5cm/1.97*1.18*0.20in

Package List:
1 * mSATA to Card
1 * Screws Bag

Note:
This adapter board simply connects the signal from the MSATA connector to the 7PIN connector, so the adapter card does not need driven. If the hard disk can not be recognized, please check if it's MINI interface, the card is basically not faulty, please know. This card supports half-height and full-height. If you want to use half-height, just cut it along the V-CUT line in the middle of the PCB.
Because the 1 interface of DN2800MT motherboard share the same signal with its MSATA slot, sp it does not fit with this adapter card.