Smart Car 4 Channel Infrared Detector Tracking Sensor Module Fit
Features:
1.This module provides a versatile infrared detection system solutions for automation machinery devices such as smart cars, robots
2.The sensor module is adaptable to ambient light. It has a pair of infrared transmitting and receiving tubes.
3.Transmitting tube sends out a certain frequency IR which will be reflected when detecting obstacles (reflecting surface) and received by receiving tube.
4.After processing with comparator circuit, signal output interface outputs digital signal (a low voltage level signal).
5.When the module detects obstacles signal, red indicator lights on and OUT port continuous outputs low voltage level signals at the same time.
6.Detection distance can be adjusted with potentiometer, clockwise to increase and counterclockwise to reduce.
7.Target reflectivity and shape is the key point of detection distance. Small and black objects have minimum detection distance, while large and white ones have maximum distance.
8.Output port can be directly connected to the SCM IO port, also can drive a 5V relay module or buzzer module directly.
9.Widely used in robot obstacle avoidance, car obstacle avoidance, assembly line counting and black white line tracking.
Specification:
Working Voltage: 3.3V-5V DC
Working Current: >1A
Detection Distance: 2~60cm
Detection Angle: 35°
Size:
Big Board: 42*38*12mm
Small Board: 25*12*12mm
Mounting Hole Diameter: 3mm
Note:
1.Do not put the probe towards sunlight. Sunlight will cause interference to module.
2.Sensitivity should not be regulated excessively high because high sensitivity can easily lead to false trigger.
3.Please allow 1-3mm deviation due to manual measurement.
Package Included:1x Infrared Tracking Module Set
