Description

The sharp cutting teeth can create precise, smooth and clean cuts with minimal burring or chipping. Slowly apply pressure otherwise you may damage the threads. Titanium plating increases hardness, corrosion resistance, heat resistance and reduces friction for better performance and longer life. Apply lubricant or cutting oil on the cutting edge to reduce friction and prevent overheating. Hold the hole saw firmly when drilling. Use the recommended cutting speed to cut the material. Start drilling with light pressure and gradually increase as needed

The power of hand electric drill needs to be greater than 750W. Do not use on the impact drill and electric hammer. Use in slow speed, minimum pressure, and keep the hole saw stable when cutting materials. Keep the cutter cool and lubricated during drilling.Characteristic:

High-speed steel and stainless steel hole saws, drill saws, sheet metal reamers.

The hole opener adopts spring design, which is conducive to chip removal and superior drilling performance.

High precision, smooth cutting edge, especially impact resistance and wear resistance.

Due to special heat treatment, sharp edges, high strength.

Hole saws will help you drill large diameter holes in metal, aluminum plates, alloy plates, plastic plates, stainless steel, mild steel, iron, copper and brass, etc.

Specification:

Material: HSS high speed steel

Color: silver/Titanium

How to use:

1.When using this item, the cutting material needs to be fixed and cannot be moved. It should be 90 degrees perpendicular to the drill bit.

2.When the center drill bit penetrates the drill bit, please wait a while, and then slowly drill the hole.

3.When drilling, if you think the drill bit is abnormal or the waste is not ideal, please stop drilling, take out the chips, and then continue drilling.

4.In order to extend the service life of the drill bit, it is important to use cutting lubricant when drilling.

5.In order to obtain the maximum hole saw life, when drilling stainless steel or steel, please use a speed lower than 300 RPM.

Centrally located in Preston & Blackpool Lancashire, UK, our commitment to prompt service is evident as most orders are dispatched on the same day they are received.

Our customer service sets us apart. At Drill Easy, we believe in prompt communication, pledging to respond to customer inquiries within an hour or less.