We call a system combining with a small grid tie inverter and a wind turbine as "SGWT". The small type of wind grid tie power inverter can obtain the wind energy from wind turbines and tie to the grid through its output cables with no extra equipment. Plug and Play.
The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The small grid tie inverter puts out power when the home grid is on.When the AC wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid.
NOTE: Any DC power input is prohibited.
The Advantage of Inverter:
1. Directly connect to three phase wind turbine（24V AC Wind Turbine Generator）
2. Plug and play, easy to install.
3.Can be paralleled on AC side
4.built-in dump Load controller
6. Each inverter need to pass twice testing (20 hours) before leaving factory.
7.Overload protection,Anti-island protection,Short-circuit protection/Reverse polarity protection
8.Wind Turbine Voltage Range:AC22V~ 60V
9. 1 year warranty, lifetime technical support.
Built-in dump Load controller:
This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.
Technical Data:
Model:SUN-1000G2-WAL
Max. Power Output:1000W
Input AC/DC Voltage Range:22-50V
AC Output Voltage Range:95-140VAC
Output Frequency:47.5Hz~51.5Hz
Standby Power Consumption:<0.5W
Total Harmonic Distortion:<5%
Peak Inverter Efficiency:92%
Power Factor:0.99
Output Wave Form:Pure Sine Wave
MPPT Efficiency:99%
Over Current Protection:Yes
Over Temperature Protection:Yes
Reverse Polarity Protection:Yes
Anti-Island Protection:Yes
Stackable:Yes
Certification: CE,VDE
Applied Standards:VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06
Weight ( Kg):5.5KG
Dimensions (W x H x D):430*310*160mm
①. ②. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor.
③.AC socket,This socket will connect the inverter to the public grid via the AC cable.
④.Cooling fans.
⑤.Input Terminals. This terminals will connect to the wind turbine.
The Inverter display can show many information,The main interface of the display and the icons explainations are show above.
Set Menu: Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.
The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.
Notes:Save the setting after you reconfigurate the working mode or backlight setting.
