(The product does not contain masts that need to be prepared yourself. We can provide flange size for your reference）

Advantages of directly connected permanent magnet generator – PMG:
Long service life
Maintenance-free and virtually wear-free
No mechanical speed transmission – Gearless
Low number of rotating components
No active generator cooling required
Only one central DIVE bearing for the entire turbine/generator unit
Particularly smooth running and low vibration
High efficiency
Extremely compact and weight-reduced
Permanent Rotor
1) Better ability captures wind from all directions, working completely automatically.
2) Low noise (<36 dBA) long service life (25 years), better efficiency (95%) automatic self-protection, wind direction tracking: rotating wind vane perfect self-protection.
Function: Better ability captures wind from all directions, working completely automatically

 

Exit folding or yawing of the rear to reduce the speed of the wind turbine at high wind speed, which plays the role of regulating and protecting the wind turbine. The normal working direction of the rear is the left and right foldable rear guard. If the wind speed is high, the reaction will not react due to the length of the tail rod, the tail wing area and the angle of the tail rod. Phenomenon, similar problems directly cause the efficiency of wind turbines to be greatly reduced, and it is impossible to maximize the value of wind turbines for the use of wind energy. At the same time, the continuous rear folding effect of the rear rod inevitably reduces the mechanical stability of the rear rod significantly. After a certain time, the rear rod breaks and other damage occurs, leading to machine failures and even dangers. For structural reasons, the conventional wind turbine with horizontal axis and folding tail can not be completely sealed, can not overcome water leakage, prevent sand and dust erosion, and cannot significantly reduce the level of safety. In the practical application of the conventional wind turbine with horizontal axis and folding tail, the rudder shaft and bushing have different degrees of wear, which affects the operating point of the rudder. It is also important that the rudder loses its function and burns out to generate electricity in strong wind conditions. Machine that causes serious damage.
Bayoung Wind Power Equipment Technology, after a long time of accurate research and practical testing, has invented a new working mode rear structure, which is applied to horizontal axis wind turbines. As we all know, the functional principle of the rear is based on aerodynamics. Simply put, when the impeller of the wind turbine rotates under the wind, a vortex pressure is formed on the back of the impeller, and the pressure of the rudder plate automatically rotates according to the pressure to reduce the impeller. The windward range reduces the wind power flowing through the impeller, and the impeller speed automatically reaches a reasonable speed to keep the impeller and generator at a good speed and ensure that the generator operates in a highly efficient state. The Bayoung Company defines a wind turbine of this structure as a rotating shaft-tail-rudder wind turbine. Through in-depth research and continuous review of our company's practice, the rotary wave wind turbine can be completely sealed with standard bearings inside and waterproof sealing rings for the connection openings of each component, which can completely prevent the sealing of dust, water and salt mist. The principle of rudder control is the gravity of the earth, and the control of the working point is not affected by time, wear and other factors. It is not easy to change the operating point, which greatly improves reliability. When the horizontal axis rotary wind turbine actually works, it benefits from a unique technological innovation. The moving parts are only the horizontal axis rotation of the rudder. The maximum working angle is 90° and there are basically no vibrations. This innovative star company has received national invention patents and utility model patents. Since 2010, all Bayoung series products with 300 to 20 kW horizontal axis have been using this technology. In the years since its market launch, no wind turbine has ever experienced a storm torch or storm stable.
Caution:
Island addresses need to pay additional accelerated fees, and when the package arrives locally, you will need to pay customs fees.