Brushless Electronic Speed Control 75200 14-84V(4-20S) Single Drive Aluminum Plate 300A ESC Electric Surfboard Robot Controller
Features:
14V-84V high voltage, 4-20S safety, maximum current 300A, stable performance.
12 SFTO1N10T high current MOS tubes with parameters of 100V/500A were used.
The CPU adopts the STM32F405 with the main frequency of 168MHZ and the CORTEX-M4 framework with DSP function.
The use of nickel copper strips,2MM thick copper strips for better overcurrent and heat dissipation performance.
Support current, duty cycle, speed, position control mode, suitable for robotic arms, robots, combat off-road vehicles.
Specifications:
Voltage: 14V-84V(4-20S safety)
Braking capacity: renewable braking
Firmware upgrade: support USB online firmware upgrade
Motor cable: 8AWG
BEC: 5V/1A output
EPRM: 150000
Power cable: 8AWG
Communication port: USB/CAN/UART/SPI/IIC
Supported sensors: ABI, HALL, AS5047, AS5048A
Continuous current: 50V/200A,75V/150A(duration depends on external heat dissipation)
Control mode: support current, duty cycle, speed, position control mode
Control communication mode: support PPM, ADC, NRF, UART,PAS
Serial port: support dual serial port use (can use Bluetooth parameters and serial port control at the same time)
Note: With any throttle handle under ADC control, ensure that the positive end of the power supply is connected to 3.3V, not 5V.
Size: 130*67.7*40.1mm
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1mm-1cm differences due to manual measurement.
Package Included:
1x Electronic Speed Control
