• Item Description:
  • For 1999-2004 Chevrolet Tracker Radiator Cooling Fan Clutch

    Item Description:

    • A fan clutch is a thermostatic engine cooling fan that can freewheel at low temperatures when cooling is not needed, allowing the engine to warm up faster, relieving unnecessary load on the engine. As temperatures increase, the clutch engages so that the fan is driven by engine power and moves air to cool the engine.
    • Most fan clutches are viscous or "fluid" couplings, combined with a bi-metallic sensory system similar to that in a thermostat. Some clutches are electronically controlled (instead of bi-metallic strip). These provide the potential to control the level of engagement depending on any number of inputs. Common controlling factors might include engine oil temperature, transmission oil temperature, coolant temperature, AC system pressures and ambient air temperature.

     

     

    Fitment:

    • 1999-2004 Chevrolet Tracker
    • 1999-2005 Suzuki Grand Vitara
    • 1996-1998 Suzuki Sidekick
    • 1999-2004 Suzuki Vitara
    • 2002-2003 Suzuki XL-7

     

     

    Fitment step:

    • Step 1: Remove the fan shroud. Because every application is different, some of these steps may need to be altered in order to fit your specific application. On most applications, however the fan shroud is fastened by several bolts which will need to be removed in order to remove the shroud. Most applications will also require removal of the top radiator hose in order to get the fan shroud out. If this is the case, be sure to drain your coolant system prior to doing this. Once this is done, you can remove the fan shroud from the engine compartment.
    • Step 2: Remove the fan. There are typically two types of ways the fan will be attached; one will be with four large bolts, in which case you will need just a basic wrench of the appropriate size to remove. The other method of attachment is a large nut that will likely require the use of a special pulley locking tool that is used to keep the pulley from moving while removing the nut.
    • Since this is a specialty tool, most people may not have access to this tool. If this is the case, an alternative to using this specialty tool can be the use of a screwdriver. Use the screwdriver to hold keep the bolt in place while loosening the nut. Pay special attention to the placement of the screwdriver while doing this as this can damage the edges of the bolts if not done properly.
    • Step 3: Rock from side to side. Once all bolts and/or nuts have been removed, hold the fan with both hands slightly rocking it from side to side sliding it off of the water pump shaft.
    • Step 4: Remove the bolts. Secure the fan on a work table with plenty of room to work with the fan shaft facing your direction. There are four large bolts in the center of the fan assembly that hold the clutch in place. Remove these bolts and the clutch will be free from the fan.
    • Step 5: Install the new fan clutch. Hold the new fan clutch in place aligning the bolt holes in the same place as the old clutch.
    • Lightly run the bolts into the holes making sure the threads are lining up properly
    • Tip: The bolts should run into the threads freely with little or no resistance. If they feel tight or like you are using too much force, you are likely cross threading them which can lead to the bolts not staying in tightly and eventually falling out. Note, this is extremely important.
    • Step 6: Tighten the bolts. Once you’ve run all bolts in finger tight, use your wrench to tighten them according to factory specifications (refer to your service manual or instructions with the new fan clutch).
    • Step 7: Put the fan back into the engine. Slide the fan assembly back into the engine compartment paying special attention to the water pump shaft alignment.
    • Once in place, gently run the four bolts back into place holding the fan with one hand and running the bolts back in with the other. This may take some maneuvering to keep things straight, but remember, slow and steady and paying attention to detail is important.

     

    Warranty:

     

    • 1year

     

    Item Include:

     

    • 1X Cooling Fan Clutch

     

     

     

     

     

     

     

     



    Item Specifics
    Manufacturer Part Number 10376383
    Warranty 1 Year
    Brand higher-autoparts
    Fitment Type Direct Replacement
    Applicable Regions US
    Placement on Vehicle Front
    Type Radiator Cooling Fan Clutch
    Interchange Part Number 1712077E05,1712077,12v Electric car radiator fan Clutch
    OE/OEM Part Number 2680,Radiator Fan Clutch
    Superseded Part Number 7764936777,Engine Cooling Fan Clutch
    Package Include 1X Cooling Fan Clutch
    Material Aluminum
    Color silver

    Shipping
    1. Package handling takes about 1-2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
     
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
     
    3.Local pick up is notavailable.
     
    4.Orders Will be shipped out from our warehouse in US.
     
    5.International Buyers C Please Note:
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 
    Payment

    We only accept payment through PayPal and other payment methods that accepted by ebay.

    Return
    1.All of our brand new items come with a 60-Days money-back guarantee.
     
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
     
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
     
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
     
    5.Shipping& handling cost are not refundable. 
     
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
     
    7.No product liability insurance is assumed.
     
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 
    Service
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal and other payment which is accepted by ebay. 
     
    Q: When will the item be shipped out?
    A: This item will be shipped with 1-2 business day once payment completed.
     
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
     
    Q: How do I return an item?
    A: My store accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    Feedback
    1. We will leave positive feedback once we get your payment. 
     
    2. If you are dissatisfied for any reason, please do not be quick to leave feedback before we solve the problem. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
     
    3. If you are satisfied with the product you received and the service we provided, that will encourage us alot to do better in the future.
    For 1999-2004 Chevrolet Tracker Radiator Cooling Fan Clutch

    Item Description:

    • A fan clutch is a thermostatic engine cooling fan that can freewheel at low temperatures when cooling is not needed, allowing the engine to warm up faster, relieving unnecessary load on the engine. As temperatures increase, the clutch engages so that the fan is driven by engine power and moves air to cool the engine.
    • Most fan clutches are viscous or "fluid" couplings, combined with a bi-metallic sensory system similar to that in a thermostat. Some clutches are electronically controlled (instead of bi-metallic strip). These provide the potential to control the level of engagement depending on any number of inputs. Common controlling factors might include engine oil temperature, transmission oil temperature, coolant temperature, AC system pressures and ambient air temperature.

     

     

    Fitment:

    • 1999-2004 Chevrolet Tracker
    • 1999-2005 Suzuki Grand Vitara
    • 1996-1998 Suzuki Sidekick
    • 1999-2004 Suzuki Vitara
    • 2002-2003 Suzuki XL-7

     

     

    Fitment step:

    • Step 1: Remove the fan shroud. Because every application is different, some of these steps may need to be altered in order to fit your specific application. On most applications, however the fan shroud is fastened by several bolts which will need to be removed in order to remove the shroud. Most applications will also require removal of the top radiator hose in order to get the fan shroud out. If this is the case, be sure to drain your coolant system prior to doing this. Once this is done, you can remove the fan shroud from the engine compartment.
    • Step 2: Remove the fan. There are typically two types of ways the fan will be attached; one will be with four large bolts, in which case you will need just a basic wrench of the appropriate size to remove. The other method of attachment is a large nut that will likely require the use of a special pulley locking tool that is used to keep the pulley from moving while removing the nut.
    • Since this is a specialty tool, most people may not have access to this tool. If this is the case, an alternative to using this specialty tool can be the use of a screwdriver. Use the screwdriver to hold keep the bolt in place while loosening the nut. Pay special attention to the placement of the screwdriver while doing this as this can damage the edges of the bolts if not done properly.
    • Step 3: Rock from side to side. Once all bolts and/or nuts have been removed, hold the fan with both hands slightly rocking it from side to side sliding it off of the water pump shaft.
    • Step 4: Remove the bolts. Secure the fan on a work table with plenty of room to work with the fan shaft facing your direction. There are four large bolts in the center of the fan assembly that hold the clutch in place. Remove these bolts and the clutch will be free from the fan.
    • Step 5: Install the new fan clutch. Hold the new fan clutch in place aligning the bolt holes in the same place as the old clutch.
    • Lightly run the bolts into the holes making sure the threads are lining up properly
    • Tip: The bolts should run into the threads freely with little or no resistance. If they feel tight or like you are using too much force, you are likely cross threading them which can lead to the bolts not staying in tightly and eventually falling out. Note, this is extremely important.
    • Step 6: Tighten the bolts. Once you’ve run all bolts in finger tight, use your wrench to tighten them according to factory specifications (refer to your service manual or instructions with the new fan clutch).
    • Step 7: Put the fan back into the engine. Slide the fan assembly back into the engine compartment paying special attention to the water pump shaft alignment.
    • Once in place, gently run the four bolts back into place holding the fan with one hand and running the bolts back in with the other. This may take some maneuvering to keep things straight, but remember, slow and steady and paying attention to detail is important.

     

    Warranty:

     

    • 1year

     

    Item Include:

     

    • 1X Cooling Fan Clutch

     

     

     

     

     

     

     

     



    1. Package handling takes about 1-2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
     
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
     
    3.Local pick up is notavailable.
     
    4.Orders Will be shipped out from our warehouse in US.
     
    5.International Buyers C Please Note:
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    We only accept payment through PayPal and other payment methods that accepted by ebay.

    1.All of our brand new items come with a 60-Days money-back guarantee.
     
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
     
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
     
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
     
    5.Shipping& handling cost are not refundable. 
     
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
     
    7.No product liability insurance is assumed.
     
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal and other payment which is accepted by ebay. 
     
    Q: When will the item be shipped out?
    A: This item will be shipped with 1-2 business day once payment completed.
     
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
     
    Q: How do I return an item?
    A: My store accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    1. We will leave positive feedback once we get your payment. 
     
    2. If you are dissatisfied for any reason, please do not be quick to leave feedback before we solve the problem. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
     
    3. If you are satisfied with the product you received and the service we provided, that will encourage us alot to do better in the future.

    Copyright of Topcn-autoparts. All rights reserved.