eBay

Isuzuperformance Front Stainless Steel Braided Brake Line (Hose) Set for fitting Wilwood Brake Calipers to 90-93 Isuzu Impulse, Stylus, Piazza, Gemini, Geo Storm, and Asuna Sunfire.

Two Stainless Steel Brake Lines / Hoses (One Left and One Right)

These Brake Lines (Hoses) are for attaching Wilwood Brake Calipers to 1990-1993 Isuzu Impulse, Stylus, Geo Storm, Asuna Sunfire, Isuzu Gemini JT151 and JT191, and Isuzu Piazza JT221.

For Front Brakes of:

1990-1993 Isuzu Impulse All; XS and RS
1990-1993 Isuzu Stylus All; S, XS and RS
1990-1993 Geo Storm All; Base and GSi
1992-1993 Asuna Sunfire; All
1990-1993 Isuzu Gemini JT151 and JT191; All
1990-1993 Isuzu Piazza JT221; All

Build Your Own Big Brake Kit.

These brake lines / hoses provide one of the most difficult to source pieces that required to build a big brake kit and attach off-the-shelf Wilwood brake calipers, to a 1990-1993 Isuzu car.

In order to build your big brake kit, you will need to obtain these other needed parts which are not included ($~1476):

Isuzuperformance Brake Rotor Hats ($390).
PN 28.440.3103 and 28.440.3104 Stoptech brand 280mm x 20.6mm rotor rings ($132).
Two PN 89.000.0002 Stoptech AeroHat mounting hardware kits (drive pins / bobbins) ($76).
Isuzuperformance Brake Caliper Brackets ($430).
Wilwood Dynapro Radial Mount Brake Calipers ($406).
Wilwood BP-10 Brake Pads 150-8850K ($42), or any Wilwood 78XX pattern brake pad.

We recommend the Wilwood 120-7327 Dynapro 4 Piston Radial Mount Brake Caliper with 1.5 inch diameter pistons as a minimum size for use with upgraded rear brakes with single piston caliper.

We recommend the Wilwood 120-8541 Dynapro 4 Piston Radial Mount Brake Caliper with 1.63 inch diameter pistons for use with upgraded rear brakes with two piston calipers (with 1.38 inch piston) or four piston calipers (with 1.0 inch piston).
This caliper provides brake pedal travel that most closely matches that of the original equipment calipers. Calipers with smaller pistons have reduced pedal travel and tend to function more like an on-and-off switch. The pedal travel with the 1.63 inch diameter pistons provides for easy modulation of braking force.
This caliper provides a large increase in clamping force over the OEM caliper, which allows for the use of reasonably mild, streetable, racing brake pads, while providing more stopping power per pound of vehicle weight, than the Brembo four piston brake caliper system used on Subaru Impreza STi and Mitsubishi Lancer Evo. This means drastically increased stopping power, while using pads that are less expensive, do not wear out as fast, cause less wear to the rotor, cause less vibration, cause less noise, and provide full stopping force when cold (do not need to be warmed up to function).

The Story Behind This Item

When the 90-93 Isuzu cars were introduced, they were among the top performers in braking performance in the category of sporty small cars. But braking technology dramatically improved in the 25+ years that followed. New small cars that are currently on the market have much more powerful braking systems, with shorter stopping distances. Upgrading the brake system of a 1990-93 Isuzu car improves both safety and enjoyment of these cars, bringing them up to, and surpassing the current standards for braking performance.

We have been using 11 inch front big brakes on our race and street vehicles for almost ten years now.

We are making these parts available for purchase so that owners of these vehicles can assemble a true racing quality, professionally designed, brake setup.

We are offering these parts in order to allow the customer the option of customizing their brake system to match their needs and desires. The calipers are available in different sizes providing different clamping forces. The calipers are available in multiple standard and customized colors. In addition, obtaining the off-the-shelf parts from the vendors with the lowest prices, the customer can assemble their brake setup for the lowest cost possible.

Includes

2 - Stainless Steel Brake Lines / Hoses (One Left and One Right) for use with Wilwood brake calipers.
- Brake lines / hoses are built with Brake Quip brand fittings and hose.
- Teflon hose core, wrapped in stainless sleeve, and then wrapped in clear hose.
- Each line / hose assembly is pressure tested and rated to 3000 PSI.
- Fittings have premium coating to protect against corrosion.
- Female end fitting (inlet end) matches OEM for proper fit in the fender well bracket.
- Line locator matches OEM to attach the hose / line to the bracket at the bottom of the strut, to prevent damage or snagging on the suspension.
- Caliper end fitting is angled to meet the caliper correctly.
- Two AN to NPT adapters are included to attach the lines / hoses to the calipers.
- The lines / hoses have been specifically designed and manufactured to fit these vehicles like original equipment.

Installation

Attach Stoptech rotor rings to Isuzuperformance aluminum brake rotor hats using the Stoptech bobbins, per Stoptech's torque instructions.
Place two piece rotor assembly onto hub. Apply a thin coat of anti-seize between mounting surfaces if desired.
Attach caliper bracket to spindle, per factory shop manual instructions.
Attach brake calipers to brake caliper brackets, per Wilwood's instructions.
Attach brake hoses and bleed brakes, per Wilwood instructions.
Enjoy driving your vehicle with new brake rotors attached.

Made by Isuzuperformance in St. Louis, Missouri, USA.

What is Isuzuperformance?

Sales Tax:

We are a registered business in the state of Missouri, and collect sales tax on all transactions delivered within the state of Missouri. Ebay may collect sales tax for shipping into and out of other states. We are not involved in that action.

Shipping Costs

Please see the listing heading for domestic and international shipping options.

Everything gets insured. Declared values match insured values and transaction totals.

Packaging

Item is padded and wrapped and placed into a corrugated cardboard box to protect the item during transit.

Thank you for looking.