Attention:
It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. These issues are detailed and fully explained on the Software website.
Description:
Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper.
1. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design,
Arts Creation, Teaching, Student Project and Hobby Purposes.
2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
cnc engraving machine parameters:
X, Y, Z Working Area: 600(Y)*390(X)*120(Z)mm
Outside dimension: 865*680*570mm(L*W*H)
Table size: 770(Y)*490(X)mm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm
Drive unit:
X axis---1605 Ball Screws
Y axis---1605 Ball Screws
Z axis---1204 Ball Screws
Sliding unit:
X axis---High intensity Chromeplate shaft
Y axis---High intensity Chromeplate shaft
Z axis---High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Spindle motor:
1,Water cooled spindle motor can work longer time than air cooled motor.
2,Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
(tips:1. The spindle motor must connect with the VFD.
2. It cannot directly connect with the supply voltage (AC220V).
3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Outside dimension: 65*158mmMaterial: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacketVOLTS, current, power: AC110V/50Hz, 5A, 1.5KW VFDSpindle speed: 24000 rpmMax working frequency: 60HzPrincipal axis collet: ER11collet,Standard configuration :6mmNut Model: ER11-ACooling: Water-coolingSpeed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPMLubrication way: lubricated by high greaseRepeat accuracy: 0.05mmSpindle precision: radial beat acuities 0.03mmCarving Instructions: G codeCommunication interface: through USB connection with computerSoftware environment: Windows XP/Win7 32BITSMaximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Control box parameters:
Operating Voltage: AC110V
Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection: USB port
Command code: G code
Protection: Emergency stop button
Feature:
1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.
2. water cooling spindle works more stable and durable.
3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
How to use:
1. Assembling and locating the CNC machine on steady desk well.
2. Make sure that your computer has a USB port output.
3. Place the contral box in a ventilated dry place where there is no dust, no moisture
4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.
6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7. Installing a CNC control software and Drive on your computer.
8. Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.
10.You can enjoy making you dream with using our CNC machine now.