Match UP 10DSP with MEC Analog In 10 Channel Amplifier & 64 Bit 11 Channel DSP

MATCH UP 10DSP

The premium sound upgrade for multi-channel factory systems

The new UP 10DSP is a real problem solver when it comes to upgrading premium sound systems in today's vehicles. Even though more and more vehicles are equipped with complex multi-channel sound systems ex works, the sound quality does not always meet one's expectations. 

In many cases, a replacement is no longer possible, so that only an amplifier with a large number of highlevel inputs and sophisticated technology can be considered for upgrading the system. And here the new UP 10DSP offers the perfect solution.

Maximum connectivity

For optimal adaptation to existing multi-channel sound systems, the UP 10DSP is equipped with not less than 8 highlevel inputs (two high power inputs with up to 32 Volts), an optical digital input, a MATCH extension card slot, 10 amplifier outputs and a total of 11 processed DSP channels. 

In addition, intelligent technologies, such as the proprietary ADEP.3 circuit and 32 Bit ACO platform, ensure safe operation.

Virtual Channel Processing – that´s how signal routing works today

The adaptation to modern OE sound systems via an increasing number of inputs has a significant impact on the complexity of the signal routing inside the amplifier. Especially when several input signals are mixed together and then split again into multi-way systems, conventional routing concepts quickly reach their limits, both in terms of implementation and usability.  Audiotec Fischer's new multi-stage "Virtual Channel Processing", in conjunction with the recognized user-friendly DSP PC-Tool software makes it easy to realize even highly complex system configurations. Besides, it allows to freely assign our proprietary FX sound features such as "RealCenter" or "Augmented Bass Processing". But the UP 10DSP, thanks to its enormous number of channels in combination with the optional MEC ANALOG IN module, is also a prime example for applications where 1 to 1 routing (IOR) makes sense.

Speed is everything – thanks to ACO

Such a huge number of channels requires ultra-fast hardware – Audiotec Fischer's proprietary 32 Bit ACO platform takes care of all control tasks and ensures the decisive speed increase, especially for data communication with our DSP PC-Tool software but also for the lightning-fast switching between up to ten sound setups.  But ACO offers much more – fantastic sound effects such as Augmented Bass Processing or RealCenter are implemented as well as a channel-separated Input EQ including the Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios.

Powerhouse in a compact format

Despite its huge output power of 8 x 65 Watts at 4 Ohms and 2 x 90 / 160 Watts at 4 / 2 Ohms at the Sub Outs, as well as the enormous feature set, the UP 10DSP comes in an extremely compact design, so that installation is possible even in confined spaces.

• Ultra efficient 10-channel amplifier with 1-channel line output and 11-channel DSP
• Perfect for upgrading multi-channel factory sound systems
• Optional cable harnesses for easy integration into existing multi-channel factory sound systems
• Extremely powerful 64 Bit “fixed point” Audio DSP
• ACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:
• ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
• SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.
• High power 8-channel highlevel input with ADEP.3 circuit – two channels with up to 32 V RMS input sensitivity
• 1 to 1 Input / Output Routing (IOR) in combination with the optional MEC ANA-LOG IN module – same number of highlevel inputs and amplifier outputs
• Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems
• MATCH Extension Card slot (MEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
• Optical input in SPDIF format with sampling rate between 12 and 96 kHz
• Mono RCA output for the connection of an external amplifier e.g. subwoofer amplifier
• SCP (Smart Control Port) for optional accessory like WIFI CONTROL, DIRECTOR, CONDUCTOR & Co.
• Auto Remote switch
• Start-Stop capability down to 6 Volts supply voltage
• Compact design with low heat dissipation thanks to extraordinary efficiency

• Output power RMS     
• - @ 4 Ohms    Channels A - H: 8 x 65 Watts
• - @ 2 Ohms    - 
• - @ 1 Ohm    - 
• - bridged @ 4 Ohms    - 
• - bridged @ 2 Ohms    - 
• - Subwoofer output @ 4 Ohms    Channels I - J: 2 x 90 Watts
• - Subwoofer output @ 2 Ohms    Channels I - J: 2 x 160 Watts
• Amplifier technology    Class GD
• Inputs    8 x Highlevel speaker input
• 1 x Optical SPDIF (12 - 96 kHz) 
• 1 x Remote In
• Input sensitivity    Channels A - F: 4 - 16 Volts
• Channels G - H: 4 - 16 or 8 - 32 Volts
• Input impedance RCA / Cinch    - 
• Input impedance highlevel    9 - 33 Ohms with ADEP.3
• Outputs    10 x Speaker output
• 1 x RCA / Cinch 
• 1 x Remote Out
• Output voltage RCA / Cinch    3 Volts
• Frequency response    20 Hz - 22,000 Hz
• DSP resolution    64 Bit
• DSP power    295 MHz (1.2 billion MAC operations/second)
• Sampling rate    48 kHz
• DSP type    Audio signal processor
• Signal converters    A/D: BurrBrown
• D/A: BurrBrown
• Signal-to-noise ratio digital input    105 dB (A-weighted)
• Signal-to-noise ratio analog input    103 dB (A-weighted)
• Distortion (THD)    < 0.03 %
• Damping factor    > 100
• Operating voltage    10.5 - 17 Volts (max. 5 sec. down to 6 Volts)
• Power rating    DC 12 V ⎓ 60 A max.
• Idle current    500 mA
• Max. remote output current    500 mA
• Fuse    2 x 25 A LP-Mini-fuse (APS)
• Additional features    Class GD technology with dynamically controlled
• power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out
• Dimensions (H x W x D)    46 x 145 x 163 mm / 
• 1.81 x 5.71 x 6.42"

• MATCH UPGRADE amplifier UP 10DSP incl. MEC ANALOG IN
• Connection cable X2
• Control Input-to-SCP adaptor
• Mounting plates & material
• USB cable
• Instruction manual