To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%

INPUT: AC100-240V 50/60HZ
charging voltage: 42V
charging current: 2A
Charging mode: CC-CV
charge indicator:Red:Charging Green: Charged OK
Charger port: DC5.5 x 2.1mm product size:132*57*32MM
Cable length: 39.4 In / 100 CM
security protection: Over-voltage proteciton /Over-current protection/ Over-load protection/ Short-circuit protection
Packing:
42v 2a battery charger*1
US plug cable*1
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.
If you pull the battery plug first while charging, especially when the charging current is large (red light),
it is very easy to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is
conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the
controller battery undervoltage protection action.
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it.
Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
Tangspower has always devoted itself to providing products with excellent quality for the end-users.
If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.
AC 100-240V, 50/60 Hz. OUTPUT: 42V, 2.0A
105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
The charger protected: Short circuit protection/ over current protection/ over voltage protection
LED: red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
10s 42v charger Compatible With meepo v3 battery charger, voyager electric scooter charger,
To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%