Welcome to the Pumaspeed Performance eBay

Eibach Pro-Spacer Kit (Pair Of Spacers) 15mm Per Spacer (System 4) S90-4-15-018-B (Black)

Box has been opened to check contents - contents are brand new and never been used.

Suitable for i20N, i30, i30N, Kona N.

SKU:	S90-4-15-018-B
Colour:	Black
Size:	15mm
System:	4
Centre Bore:	67mm
For What Thread:	M12x1,5
Fittings:	Fittings included
Spacer Stamping:	91415002
Extra Notes:	ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw (Maximal up to the beginning of the nut. - We recommend only to shorten the minimum lengh.) If shorten the stud bolts, first please consider that all wheels used at the car still will fit (e.g. summer- / winterwheels) ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface! It´s allowed to shorten the stud bolts

Spacer with a screw system.
With centering collar (centering nose / hub centric)
Track change from 30mm to 60mm (spacer thickness from 15-30mm)
Fasterning, A) spacer at wheel carrier: by using a special fixing nut. B) Wheel at disc: using production (or special wheel nut)
Delivery with attachement parts
System 8 without centering collar (not hub centric)

PRO-SPACER | Wheel Spacers

Made from high-tensile-strength aluminum alloy
Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
All applications tested in rigid durability and fatigue tests
High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
Significant weight advantage compared to wheel-spacers made from steel

Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That’s how the car’s look gets its final touch.

By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Optimize the "sportive touch" to the last detail: wheels, tyres, Eibach Suspension Components and Pro-Spacer!