eBay

Description

Part Number: PTK-8517

ProTek RC Prodigy 610 QUAD AC LiHV/LiPo AC/DC Battery Charger (6S/10A/100W x 4)

This is the ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger. A quad port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 110V/220V voltage versatility, with 100 Watts of power per side...the next generation of Prodigy has arrived. Backed by ProTek R/C's revolutionary customer support, the Prodigy 610 QUAD AC delivers the power you need to get your batteries charged fast and eliminates the need for an external power supply!The Prodigy 610 QUAD AC delivers a variety of powerful, yet useful features. The Digital Power setting allows users to power additional DC powered equipment, while the Pre-Charge function gives users an opportunity to save Lithium batteries that have been discharged too far. Additionally, compatibility with all common battery types means the Prodigy 610 QUAD AC is an all in one solution for your battery management needs.These features only scratch the surface of what the Prodigy 610 QUAD AC delivers. Pick one up and see for yourself why Protek R/C is found on the benches of some of the most respected R/C professionals in the world, including racer Atsushi Hara, pilot Tim Jones and more. The next generation has arrived. Don't get left behind.Hi-Voltage CapableThis charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.40V per cell, which is considerably higher than 4.20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model. But please note: battery voltages exceeding 4.20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc.Prodigy 610 QUAD AC Features:QUAD Channel Digital AC/DC Balance ChargerMaximum 10A Charge Current, up to 100W Per ChannelMaximum 5A Discharge Current, up to 10W Per Channel10 Charge/Discharge Profiles110V or 220V AC InputHi-Voltage LiHV charging mode allows charging end voltage up to 4.40VPre-Charge Function to Help Restore Lithium Packs with Cells Below 3.0VDigital Power Program Delivers 3V - 24V to Power Other DC DevicesSupports up to 6S Lithium & 15 Cell Nickel Battery PacksLithium, Nickel & Lead Acid CompatibleHeavy Duty XT 60 DC input Connector±0.01 Balance Tolerance RangeMultiple Safety FunctionsHeavy Duty Metal CaseBack-Light ScreenEfficient Heat SinkCharger Model Prodigy 610 QUAD ACAC Input Voltage Range AC 110V or 220VDC Input Voltage Range DC 11.0V - 18.0VCharge Current Range 0.1 - 10.0ADischarge Current Range 0.1 - 5.0ACharge Power Limit Max. 100W x4Discharge Power Limit Max. 10W x4Balance Current Max. 250mABalance Tolerance ±0.01VNiCd/NiMH Cell Count 1 - 15 CellsLithium Battery Types LiHV, LiPo, Li-Ion, LiFeLithium Battery Cell Count 1 - 6 CellsPb Battery Voltage 2 - 20VDigital Power 3 - 24VWeight 1750gDimensions 240x220x68mmNOTE: To determine if this charger is suitable for your application, you must perform this calculation to determine the maximum amp rate the charger can supply. Divide the Watts of the charger by the Voltage of the battery pack. This will tell you the maximum amp rate the charger can deliver (Watts / Voltage = Amps). So using the 610 QUAD AC as an example and a 6S LiPo battery pack, would be 100 Watts divided by 22.2 Volts, which equals 4.5 Amps. This means that the charger can supply a maximum of 4.5 amps to a 22.2 Volt 6S battery. This amp rate will gradually reduce as the battery voltage increases during the charge cycle.IMPORTANT:1) DO NOT leave the battery in your model when charging2) DO NOT leave unattended when charging3) ALWAYS balance charge the battery4) ALWAYS use a LiPo charging bag5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)6) YOU MUST not over discharge the Li-Poly battery pack7) READ & UNDERSTAND the instructions carefully before operating this batteryIncludes:(1) Prodigy 610 QUAD AC Charger(1) DC Power Input Cable w/XT60 Connector(1) AC Power Input Cable(1) JST Connector Charge Lead(1) Futaba Connector Charge Lead(4) T-Plug Charge Leads(1) Alligator Clip Charge Lead(2) Battery Clamps(4) XH Type LiPo Balance BoardNOTE: Included power cord is only compatible with Type B 110V outlets. "Type E/F" (PTK-5316), "Type G" (PTK-5317), and "Type I" (PTK-5318) power cords are available and must be purchased separately.WARNING NOTE: This charger is not recommended for use with Traxxas batteries with ID connectors or Spektrum Smart batteries with IC connectors. Charging batteries equipped with ID or IC connectors may require additional steps in order to safely balance charge your Lipo batteries. Please refer to your vehicle or aircraft owner’s manual for recommended batteries and charging equipment.

Payment

We only accept Paypal payment through Ebay. No outside sales or payments.

Payment to be made within 3 days of purchase.

We only accept U.S. currency.

State law requires that we charge sales tax on all orders shipped to the state of New Jersey (Sales tax subject to change).

Combined Shipping

Yes, we can combine shipping on orders for a savings. After you add the items to your cart, there is a link to ask seller to combine the invoice. I can adjust the shipping and send back the new invoice. This option is only available on the PC. The Ebay App does not offer the combine feature. Thank you

Shipping

We only ship to the registered address in (Ebay), no exceptions.

We ship next business day (excluding holidays) after payment.

Tracking info will be emailed to you once shipment has been processed for shipping.

Please Note: Packages with a valuation of $200.00 or higher will have "Signature Required" on the package at the time of delivery. This is a Ebay policy.

We do not offer local pickup.

International Shipping

Import duties, taxes and other charges are not included in the total that you receive on the invoice. (These are the buyers responsibility). Check with your local customs agent for more details.

International shipments can take 2-4 weeks for delivery, depending on the shipping method chosen at checkout.

We do not lower the value on packages.

Warranty

All manufacturers require us to have buyers forward all warranties to them. We will help in this process, so please feel free to contact us.

Contact Us

Please, if you have any questions, send us a email through Ebay messages and we will be glad to answer.