This PoE injector surge protection is designed to protect indoor Ethernet networks from lightning that may come from outdoor environment through the Ethernet cable. This product is enclosed in a metal weatherproof enclosure, meeting IP66. It can be installed before the cable enters the building to protect indoor network or immediately adjacent to the wall- or pole- mounted base station. It can support data rates of up to 1Gbps, and protects up to 10kV surge. All its eight lines are protected including PoE injector.Network
Technology
SPD configuration
Connection to Network
Format
Mounting
Operating temperature
Dimensions
Weight
Protection rating
Outdoor application
Failsafe behavior
Disconnection indicator
Remote signaling of disconnection
Nominal line voltage (Un)
Max. DC operating voltage (Uc)
Max. line current (IL)
Protection level (Up)
Nominal discharge voltage 8/20µs
Impulse current 2 x 10/350µs Test - D1 Category (Iimp)
Nominal discharge current 8/20µs Test x 10 - C2 Category (In)
Max data rate
CertificationsPOE and Gigabit Ethernet High POE (95W)
Clamping diode
4 pairs + shielded
RJ45 shielded connectors female input/output
Metallic box with connectors input/output
Wall or pole mount
-40°C to +85°C
30 x 30 x 190 mm
270g
IP66
Yes
Short-circuit
Transmission interrupt
None
48 Vdc
60 Vdc
2A
500V
10 kV
100 A
5 kA
1000 Mbps
IEC 61643-21 / EN 61643-21 GR1089 ITU-T K.45 UL497B IEEE 802-3ab/3at