The FCC ID: 2A4ZJCPE220 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condistions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Accurate Operating Frequencies: 5745-5825 MHz for 802.11a/n(HT20);5755-5795 MHz for 802.11a/n(HT40);

Computer Access To CPE:
1. Use an Ethernet cable to connect the PoE adapter (PoE port) to the CPE for power supply, and use another Ethernet cable to connect the PoE (LAN port) to the computer's LAN port.
2. To ensure that you can successfully access the CPE, you need to modify the computer’s IPv4 address to 192.168.255.X(X represents the number from 2-255), refer to the user manual or Google to search for how to modify the computer’s IP address.
3. Determine the IP address of the CPE through the numbers on the digital display. For example, if the number displays "2", the IP address of the master A-CPE is 129.168.255.102, and the slave B-CEP is 192.168.255.202. Refer to the user manual number and IP comparison table.
4. Make sure that the IP address of the computer is successfully changed to 192.168.255.X, and the IP address of the CPE is found. Then you can open the web browser of the computer and enter the IP address of the CPE to access the CPE, enter the account password "admin/admin" to log in, and the access is successful.

Specification:
Model: CPE220
Wired interface: 10/100Mbps LAN*2
Power supply: POE 24V 0.5A
Antenna: 12DBi (5180～5825MHz)
Waterproof:Support
Dust-proof:Support
Working temperature: -4℉～158℉
Storage temperature: -22℉～176℉
Item Dimensions:6.88''*3.62''*2.36''
Item Weight: 23 oz

Package List:
2 X CPE220 Wireless Bridge
2 X PoE Power Adapter
2 X Metal Hoop
1 X User Mamual
GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the IEEE802.11a and IEEE802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.