SERIOUS BUYERS ONLY!
PLEASE READ STORE DETAILS CAREFULLY! 

 

 

*** NEW OUT OF BOX ***

ELCOMETER 456 F A456CFBS MODEL B FERROUS SEPARATE DFT GAUGE

NO PROBES ARE INCLUDED WITH THIS SETUP AND MUST BE PURCHASED SEPARATELY

PART # A456CFBS

TThis is a new open box unit, it is missing the original box, only what is pictured is included plus new 2 x AA Batteries. Please note the black rubber piece leaves a white residue when it is touched and handled, the unit is new otherwise.

RETAIL: $795

Item Details:

Manufacturer: Elcometer

 

 Elcometer 456 Coating Thickness Gauge
The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.

The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.

Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.

Separate coating thickness gauge models, with their wide range of probes, provide even greater dry film thickness measurement flexibility.

Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation.

 

Halve inspection times using the Elcometer 456 Coating Thickness Gauge with Scan Probe

 

Featuring a highly durable probe cap, the Elcometer 456 Coating Thickness Gauge Scan Probe is a revolutionary design which allows users to take individual dry film thickness readings or rapidly scan large surface areas - without damaging the probe or the coating.

When used in conjunction with the Elcometer 456 Coating Thickness Gauge Scan or Auto Repeat Mode, the Scan Probe enables users to significantly reduce dry film thickness inspection times without affecting accuracy. 

With a reading rate of 140 readings per minute, the Elcometer 456 Coating Thickness Gauge with Scan Probe allows you to inspect more coatings in less time.

 

Key features of the Elcometer 456 Coating Thickness Gauge include:

 

Easy
  • Large buttons ideal for gloved hands
  • Easy to use menus in multiple languages
  • High contrast colour LCD with auto rotate
  • High and low reading limit indicators
  • Factory calibrated for immediate use

Accurate

  • Thickness measurement capability to ±1%
  • Can be used in accordance with National & International Standards
  • Temperature stable measurements
  • Increased reading resolution for thin coatings
  • Measures accurately on smooth, rough, thin and curved surfaces
 
Reliable
  • Repeatable and reproducible
  • 2 year gauge warranty
  • Supplied with fully traceable test certificates
  • Batch date and time stamp facility

Rugged

  • Sealed, heavy duty and impact resistant
  • Dust and waterproof equivalent to IP64
  • Scratch and solvent resistant display
  • Durable gauge and probe construction
  • Suitable for use in harsh environments
 
Efficient
  • Fast reading rate of 70+ per minute, 140+ per minute with Scan Probe
  • Multiple calibration memories
  • Alpha numeric batch identification
  • User selectable calibration methods
  • Compatible with ElcoMaster® and ElcoMaster® Mobile App

Powerful

  • Wide range of interchangeable probes
  • USB and Bluetooth® data output to iPhone* or Android™ devices
  • Stores up to 150,000 readings in 2,500 batches
  • Measures up to 31mm (1220mils) of coating on metal substrates
 

The importance of Coating Thickness Gauge Calibration

 

Formal quality systems, such as those described in ISO 9001, require coating thickness gauges to be properly controlled, logged and calibrated. Increasingly, users are specifying that the readings taken by thickness gauges are traceable to National Standards.

 

In order to test the accuracy of a particular gauge it is important to have traceable coating thickness standards.

 

Elcometer offer a comprehensive range of certified foils together with zero test plates to ensure the accuracy of the coating thickness gauge.

 

Get the best performance from the Elcometer 456 Coating Thickness Gauge and make the best use of the gauge’s ±1% accuracy by calibrating the coating thickness instrument to suit the application. This video will guide you through a range of calibration options for both the integral and the separate models.
  

product Features ■ Standard □ Optional
  Model B Model S Model T

Fast, accurate reading rate; 70+ readings per minute

 ■

■

 ■
Repeatable & reproducible measurements ■ ■ ■
Easy to use menu structure; in 30+ languages ■ ■ ■
Tough, impact, water & dust resistant; equivalent to IP64 ■ ■ ■
Bright colour screen; with permanent back light

■

■

■

Scratch & solvent resistant display; 2.4" (6cm) TFT

■

 ■ ■
Large positive feedback buttons ■ ■ ■
USB power supply; via PC ■ ■ ■
Test certificate ■ ■ ■
2 year gauge warranty* ■ ■ ■
Automatic rotating display; 0°, 90°, 180° & 270° ■ ■ ■
Ambient light sensor; with adjustable auto brightness ■ ■ ■
Emergency light ■ ■ ■
Tap awake from sleep ■ ■ ■
Gauge software updates¹; via ElcoMaster® software ■ ■ ■
Data output ■ ■ ■

USB; to computer

 ■ ■ ■

Bluetooth®; to computer, Android™ & iOSǂ devices

   ■ ■
On screen statistics ■ ■ ■

Number of readings; η

 ■ ■ ■

Mean (average); x

 ■ ■ ■

Standard deviation; ó

 ■ ■ ■

Highest reading; Hi

 ■ ■ ■

Lowest reading; Lo

 ■ ■ ■

Coefficient of variation; CV%

 ■ ■ ■

Elcometer index value²; EIV

 ■ ■ ■

Nominal dry film thickness; NDFT

   ■ ■

IMO PSPC; %>NDFT, %>90

   ■ ■

High & low limits; definable audible & visual alarms

   ■ ■

Number above high limit;

   ■ ■

Number below low limit;

   ■ ■
Live reading trend graph; in batch mode   ■ ■
ElcoMaster® software & USB cable □ ■ ■
Replaceable screen protectors □ ■ ■
Protective case ■ ■ ■
Plastic transit case □ □ ■
Integral models; with automatic gauge switch on ■ ■ ■

Probe type; Ferrous (F), Non-Ferrous (N), Dual (FNF)³

 F, N, FNF  F, N, FNF  F, N, FNF 

Measurement range

 0-13mm
0-500mils		  0-1500μm
0-60mils		  0-1500μm
0-60mils
Separate models; with automatic probe recognition ■ ■ ■

Probe type; Ferrous (F), Non-Ferrous (N), Dual (FNF)³

 F, N, FNF F, N, FNF F, N, FNF

Measurement range

 0-31mm
0-1220mils		 0-31mm
0-1220mils		 0-31mm
0-1220mils
On-screen calibration instructions; in 30+ languages ■ ■ ■
Multiple calibration methods ■ ■ ■

Factory; resets to the factory calibration

 ■ ■ ■

2-point; for smooth and rough surfaces

 ■ ■ ■

1-point; zero calibration

 ■ ■ ■

Zero offset4; for calibration according to ISO19840

   ■ ■
Predefined calibration & measurement methods   ■ ■

ISO, SSPC PA2, Swedish, Australian

   ■ ■
Automatic calibration; for rapid calibration   ■ ■
Calibration memory type; gauge (g) or gauge & batch (gb) g gb gb
Number of batches; with unique calibrations   1 2,500
Calibration memories; 3 user-programmable memories     ■
Measurement outside calibration warning     ■
Calibration lock; with optional PIN code unlock ■ ■ ■
Delete last reading ■ ■ ■
Gauge memory; number of readings Last 5 1,500 150,000
Individual batch calibrations; sent to PC via ElcoMaster® ■ ■ ■
Limits; user definable audible & visual pass/fail warnings ■ ■ ■

Gauge (g) or gauge & batch specific (gb) limits

   g gb
Date and time stamp   ■ ■
Batch types; normal, counted average, IMO PSPC   ■ ■

Navsea Mode

     ■
Batch review graph     ■
Review, clear & delete batches   ■ ■
Copy batches and calibration settings     ■
Alpha-numeric batch names; user definable on the gauge     ■

Scan & Auto Repeat Modes; with Scan probe connected

    

■

Fixed batch size mode; with batch linking     ■

 

Technical Specification 
Display information 2.4" (6cm) QVGA colour TFT display, 320 x 240 pixels
Battery type 2 x AA dry cell batteries, rechargeable batteries can also be used
Battery life ~24 hours of continuous use at 1 reading per second5
Gauge dimensions
(h x w x d)		 141 x 73 x 37mm (5.55 x 2.87 x 1.46")
Gauge weight 161g (5.68oz) including supplied batteries
Operating temperature -10 to 50°C (14 to 122°F)
Packing List Elcometer 456 gauge, wrist harness, transit case (T), protective case (B, S, T),
1 x screen protectors (S, T), 2 x AA batteries, operating instructions, 


5 Using default settings & lithium batteries, alkaline or rechargeable batteries may differ


Condition: NEW OUT OF BOX

Auction Details:

Shipping:
  • All domestic packages will be shipped out via Fedex, UPS, or USPS within the lower 48 states
  • Shipping to Hawaii and Alaska would be extra, and those shipments will be shipped out via USPS priority mail, unless otherwise stated in the auction or negotiated in emails.
  • Shipping to APO, RR, or PO box will be handled via USPS and would be extra on certain items, please email us prior bidding.
  • Goods will be dispatched the latest in 2 business days.
  • Goods will be shipped out after the holidays and weekends.
  • No local pick ups accepted at this time, unless otherwise stated in the auction
  • Shipping costs are set at that price to cover some of our costs and packaging and handling fees as well as some of the ebay and paypal fees which add to about 13% of the total end price. Please don't email us to negotiate about the shipping costs.  We are extremely busy, so we might not answer your emails.
  • Shipping and handling fees are not negotiable, by bidding on this item the buyer agrees to pay for all the shipping costs
  • We ship to any destination in the world.
  • INTERNATIONAL BUYERS: The International shipping rate is flat rate to most destinations in the world, please email us for additional information.
  • California buyers are subject to pay 9% tax.
  • International  buyers are responsible for all tax and custom duty charges outside the country.
Payment:
  • U.S. Buyers: Credit cards through PayPal
  • Please note that we can't accept direct credit card payments at this time
  • International Buyers: PayPal or Wire
  • Payment is due within 6 days of auction closing. If payment is not received within this time unless otherwise stated or negotiated, item will be relisted on eBay.
Terms & Conditions:
  • After the auction is closed, auction winners should contact us regarding any questions or requests.
  • After the auction is closed, payment should be received within 6 days.
  • Buyer has 30 days to return the product, return product should be brand new with all original accessories, buyer pays shipping costs.
  • Shipping and handling charges are not returnable
  • Items will be replaced or exchanged in case of DOA
  • If the same item or similar item is not in stock in case of DOA, the buyer will receive a refund back
  • We combine shipping to save customers money, however, there will be an additional charge per item, please read the description for each item to find out about the specific fees.
  • All buyers are subject to pay all taxes and duty fees inside and outside of the United States,
  • Our facilities are closed during the weekends and other holidays and there will be no shipments during these time periods. All packages will go out after the weekend or after the holidays.
Contact Information: Please use ebay message