Up for auction is a cleaned, re-greased. rebuilt and tuned-up motor that works with antique Victor Victrola windup phonographs. This is a two-spring, single-barrel model, with the speed-indicator mechanism and the three original bolts needed to attach it to the motor board. The nuts and washers (including the felt washers) are included with the bolts. I personally took apart and cleaned this entire motor, removing the old dirt and grease right down to the grooves in the gears. The springs were taken out of the barrel, scraped, cleaned and re-packed with fresh grease, and the governor was adjusted, so this motor is running very smoothly. It is ready to go right in your phonograph. There is surface discoloration on the frame and barrel, but this will not affect the motor operation in any way. This motor will work on many tabletop, console and upright Victor Victrola phonographs. Please note the distances between the bolt holes: 5 5/8 inches, 5 7/8 inches and 6 3/8 inches. Whoever wins this motor should add grease to the winding gears and possibly some additional oil to the other gears because I used only enough to get it running smoothly. I didn't want it arriving to you a greasy mess! This would be ideal if you need a new or spare motor for your Victor Victrola or just like to collect old phono parts! I'm starting it at $80.00, with $35.00 for shipping. Good luck and thanks for viewing my auction!

---