AC Compressor w/ Clutch for 2009-2016 Jeep Patriot Compass 09-12 Dodge Caliber
Specifications:
Material:Aluminum
Color:Silver
Placement on Vehicle:Front
Voltage:12V
Compressor Style:6SEU16C
Pulley Groove Quantity:6
Pulley Diameter (mm):120
Suction Port Diameter (mm):18
Part Numbers:
CO 30011C, 55111610AA, 55111610AB, 55111610AC, R5111610AB, RL111610AB, 157388, 158388
Fitment:
2009 Dodge Caliber 1.8L
2009-2012 Dodge Caliber 2.0L
2009-2012 Dodge Caliber 2.4L
2009-2017 Jeep Compass 2.0L
2009-2017 Jeep Compass 2.4L
2009-2017 Jeep Patriot 2.0L
2009-2017 Jeep Patriot 2.4L
Packag include:
1 x A/C Compressor W/ Clutch
Features:
Built to strict quality control standards 100% factory tested.
100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards.
This
powerful auto AC compressor can provide intense pressure to achieve
strong cooling effect, and it also manifests excellent performance in
dissipating heat and ventilation.Longer life of the alternator through
the use of premium brushes and other critical components that resist
failure or poor performance.
Our AC compressor kit works
efficiently under low noise and tiny vibration to provide you a super
cool trip. Driving at a stable speed will help reduce fuel consumption.
The
compressor is mainly made of high-strength aluminum alloy, therefore,
it is not only durable but also ensures stability and a real long
service life.
Attention:
1.Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2.Flush
the condenser and evaporator using NON-OIL BASED A/C flush. On
expansion valve systems. The valve must be removed before the
evaporator can be flushed. Flushed condensers from outlet to inlet and
evaporators from inlet to outlet.
3.Drain all the oil from the
new compressor and dispose of according to local, state and federal
laws. (NOTE: if your compressor has a drain plug, you will need to open
it up and drain what oil is in there too.)
4.Install half oil
charge into the compressor and the remainder throughout the system. Turn
compressor shaft 8-10 full revolutions to insure front seal and other
internal parts are lubricated.
5.Install new receiver drier or accumulator and new orifice tube or expansion valve.
6.Evacuate the A/C system for a minimum of one hour.
7.After
evacuation install half the refrigerant charge and let the system set
for 1 minute. This will allow the refrigerant to pick up oil and spread
more evenly throughout the system.
8.Start engine whit A/C controls on MAX AIR with door and windows open.
9.Add the remaining charge of refrigerant as called for by the manufacture.
Note:
It is necessary to add appropriate amount of oil and refrigerant to the ac compressor before use.
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |
![]() | ![]() |