Rock’N R
Guitars LLC Custom Shop
Loaded Red W/Light
Brown Tortoise SSS for Stratocaster Pickguard
Gilmour Mod (7-Way
Switching), Split Tone, Treble Bleed
Guitar Madness Hex
Pole Pickups
**Premium Stew Mac Branded CTS Pots**
*Protective
Plastic film still on Pickguard*
**Requires
1-3/8" depth in control cavity**
***Ships in a USPS
Priority Box***
*1 Set Guitar
Madness Hex Pole Pickups
*1 4-Ply Red
W/Light Brown Tortoise Copper Shielded SSS Pickguard
*1 Short Arm Mini
Toggle Switch
*3 CTS 250K
Potentiometers (StewMac branded Pots are better quality and have better specs
than a normal CTS Pot)
*2 Orange Drop
.047uf Capacitors
*1 Treble Bleed
(Orange Drop .001uf Capacitor W/150Kohm Resister)
*3 Cream Pickup
Covers
*3 Cream Strat
Knobs
*1 Cream Switch
Knob
* Gavitt
Cloth Wiring
7-Way
Switching: The
Pickguard is equipped with a Mini Toggle Switch. When flipped to the
"ON" Position it activates the Neck Pickup. When the 5-Way
Switch is in the Bridge Position the Neck and Bridge Pickups are Active. In the
Middle/Bridge Position, All Pickups are Active. This is sometimes called the
Gilmour Mod. Named after David Gilmour of Pink Floyd Fame.
Split Tone Mod: The Neck and Middle Pickups share a
Tone Pot, while the Bridge Pickup has a Tone Pot of its own. When the
5-Way Switch is in the Middle/Bridge Position, both Tone Pots are Active
allowing you to blend the tone of the two Pots. And, because this has 7-Way
Switching, there are even more blending options. A very nice option
indeed!
Treble Bleed:
A Treble Bleed
allows the highs to pass through the Volume pot as you roll off the Volume.
What this does is keep the Brightness and the Clarity of the pickups the same
as you roll down the volume. You have the same clarity and brightness at 10 as
you would at 9,8,7,6 and so on. This is a super nice!
Guitar Madness Hex Pole w/Dual Ferrite Magnet PUPS:
These are excellent sounding Hex Pole Pickups. Similar construction
to P-90’s with two magnets on either side of the pole pieces. This gives a nice
punchy with clarity pickup. (Middle
Pickup is RWRP for noise cancelling in positions 2 & 4)
This is a
great way to update your Stratocaster. We only use Top-of-the-Line
Components, and that makes all the difference.
These
pickguards are designed to fit most USA/MIM Strat’s’, full thickness Squier
bodies (1-3/4”), Debut Squier, and other Strat type guitars with at least
1-3/8” depth in the control cavity. As in all aftermarket pickguards the
pickguard screw holes may be slightly off due to the year of manufacture,
model, and plants the guitars were manufactured in. You may need to drill a few
new screw holes in your guitar body to line up with the Pickguard screw holes.