10

X

13mm – 15mm

STAINLESS STEEL

DOUBLE EAR ‘O’ CLIPS

Part No: SS-OC-015

DOUBLE EAR ‘O’ CLIPS STAINLESS STEEL RANGE

APPLICATION INSTRUCTIONS

In order to achieve optimum performance
1. Selection of the correct size of ‘O’ Clip is essential
2. Correct method of closure must be employed

IMPORTANT

Selection of Correct Size of clip is essential. The inside Diameter of the Clip should be approximately 0.04mm 1/64in larger than the overall diameter of the tube plus fitting in order to obtain maximum joint efficiency.
To achieve the correct results it is recommended that pincers rather than ordinary pliers are used. Purpose designed ‘O’ Clip Closing Pliers with induction hardened jaws are available from the manufacturers or stockiest.

OTHER SIZES

Product	Diameter
Code	mm
SS-OC-007	5 - 7
SS-OC-009	7 - 9
SS-OC-011	9 - 11
SS-OC-013	11 - 13
SS-OC-015	13 - 15
SS-OC-017	14 - 17
SS-OC-018	15 - 18
SS-OC-020	17 - 20
SS-OC-021	18 - 21
SS-OC-023	20 - 23
SS-OC-025	22 - 25

 SOME ADVANTAGE OF ‘O’ CLIPS vs WORM DRIVE & BOLT TYPE HOSE CLIPS

1.       The strength and performance of a ‘O’ Clip is the whole of the section, and is not dependent on the single thread strength of a bolt, not or worm drive.

2.       ‘O’ Clips are permanent and tamper proof. They have to be destroyed to be removed.

3.       Low unit cost from design simplicity.

4.       Lower production costs from faster attachment time.

5.       Dimension tolerances are lower and more consistent than conventional fasteners.

6.       There are no areas of stress concentration. The heat treatment and manufacturing processes ensure uniformity of properties.

TYPICAL APPLICATIONS

‘O’ Clips have wide application in manufacturing industries including : -

Consumers Appliance Manufacturers
Commercial Vehicle Manufacturers
Boat Builders
Office Equipment & Machine Manufacturers
Engine Manufacturers
Gas & Chemical Industries
Paint Spray Equipment Manufacturers
Building & Plumbing

Automobile Manufacturers
Aircraft Manufacturers
Caravan Manufacturers
Vending Machine Manufacturers
Automotive Component Manufacturers
Welding Equipment
Compressor Manufacturers
Heating & Ventilation

APPLICATIONS

Hot/Cold Water connection in domestic washing machines, dishwashers etc. Coolant pipe connection in consumer and commercial refrigerators and freezers. Connection brake air lines, fuel pipes and water pumps etc. Heating and ventilating system in passenger cars and commercial vehicles. Butane/Propane/Oxygen container connection. Joints for heating appliances in caravans boats etc. connection to welding torches, cutters etc. Joints for pressurized liquid dispensing and material transfer systems - paint spraying material lines - beer dispensing- pipes from kegs etc.

We Also stock a variety of Venair silicone products which will enable you to fit and make up Hose Kits for a wide range of leading performance car manufactures including:

Audi - BMW Mini - Citroen - Fiat - Ford - Honda - Hyundai - Jeep - Lancia - Mitsubishi - Nissan - Peugeot - Renault - Seat - Subaru - Vauxhall -  VW Volkswagen

Please take a look at our

Ebay Shop

THANKS

FOR

LOOKING